15 Latest Trends And Trends In Car Key Cover Fiat 500 Fiat 500 Key Fob Replacement

If your 500 keyfob stops functioning, try another to see if it can be recognized by the car. If it does, the problem is likely to be related to the original fob's battery, or water damage.

Replace the battery first. The "+" side should be facing downwards.

Dead Battery

The majority of the time, when a fob's not working, it's just because the battery is dead. It's easy to fix and most fobs will notify you that the battery is failing. You can find instructions on YouTube for nearly any key fob in your car or in the owner's manual. You can also replace it by taking it to an expert locksmith or the dealer who sold it to you.

Sometimes, a fob won't working due to a problem with the internal circuit board. It is rare but it does happen. If you dropped the fob on something sharp, it can damage the internal chip. This is also the case if you use an aftermarket key and the fob does not function. In this case you'll have to visit a locksmith or dealer and get it reprogRammed to work with your 500.

One 2012 FIAT FIAT 500 flip key remote - resembles Ilco with locks, unlocks, and trunk buttons – new keyless entry replacement (will need to cut & program by a locksmith).

Chips damaged

Fiat 500 key fobs are wireless devices that transmit an electronic signal to the car every time you press the button. It has a microchip that holds information about the code needed to communicate with your car. If the chip is damaged, it won't transmit the correct code, and the car won't start. Locksmiths can fix this kind of damage. United fiat replacement key can complete this repair on both traditional and newer models, so do not hesitate to call.

A locksmith can program the new key fob. This is much less expensive than going to the dealer and will work exactly the same way. A locksmith will require specific information from you, including the year that your car was manufactured and the model's name.

Rub the chip with an old dollar bill if you're not certain of what to do. The copper in the bill is abrasive and will remove dirt and oxidation. However, it will not cause harm to the microchip. If the chip is physically damaged however, it may not be able to be repaired. This could happen if you drop it or hit it by your vehicle.

Water Damage

If you've accidentally dropped your keys in the pool, threw them in your purse while swimming at the beach or splashed them with water during a rainy day it's likely your fob will suffer from water damage. Even if it only has some water on the key, it can cause serious problems for its electronics and stop it from working correctly.

The good news is that you can solve this issue by taking off the fob's key and then using paper towels to rid it of any remaining dirt or water. When the fob is dry and clean, you can replace the battery and it should start working normally.

You can take it to an auto shop or locksmith to get it professionally programmed and cleaned. They can employ special equipment to ensure that the key fob works with the computer in your car.

When the key fob on your Fiat 500 stops working, you may feel irritated and overwhelmed. You might be tempted to go to the dealer replace your key fob however, this can be expensive and unaffordable. A locksmith can replace your key fob, without having to visit an establishment. They are a better choice than a dealership.

Pairing Issues

If you drop your keyfob, or it ceases to function, and nothing else appears to be wrong, it may be the chip. This could be due water damage or the battery is dead.

Often, this can be done by following the directions in the owner's manual. However it's recommended to have an automotive locksmith take care of this if you're having difficulties or the steps in the manual don't work for you. This will ensure that the chip isn't fried, and it's also the cheapest option.


Some 500 owners have also reported that their key fobs do not lock their vehicles. This could be a major problem if you're heading to a gas station and want to refill. Some owners have reported the locking mechanism on their 500's failing and they had to replace the entire steering intermediate shaft. Fiat has actually addressed this issue in a technical bulletin (TSB).

If you're experiencing issues with your Fiat, a reputable locksmith can help. They'll duplicate your existing key or make you an entirely new one that can lock and start the car. They can make this happen without ever seeing your previous key and are usually much less expensive than purchasing it from a dealership.