16 Facebook Pages That You Must Follow For Window Repair Marketers Why Window Repair Is Necessary

A pebble that is thrown by the lawnmower or a heavy drink set on a glass-topped coffee table are among the many factors that can cause cracks in window glass. A damaged window may allow wind, rain, bugs and other undesirable elements to enter your home.

While it is not possible to make a window that has been damaged completely invisible however, there are ways to fix it and stop it from becoming worse.

Water Damage

If water is seeping through your windows replacing them is typically required. Moisture can cause rot to the wooden frame of your window. It can also reduce the efficiency of your window's energy use. A reputable window company can replace your windows without destroying the integrity of your existing frames.

Wood rot can affect both the inside and outside of your windows. If your windows are made of wood and have spots of rotting, a repair may be possible when the rot isn't advanced. However when the rot has spread to the mullions or muntins (the parts of the window frame that support the glass panes) they might need to be rebuilt. This can cost more than a new set of windows.

Another common issue that requires replacement is a faulty seal between double-paned windows. It could be a result of condensation or debris between the two panes, or it could be an indication that your window's insulation has been damaged. Fortunately, many modern windows have insulation built into them. They won't have the same issues as older windows that have multiple panes.

The ugly casings, like those that are damaged, cracked, loose or rotten, or even missing, can create other issues. It's not necessary to replace your windows if your casing is damaged. Depending on the condition of your casing as well as the surrounding wood you may be able to sand and paint it to improve its appearance.


If the casing on the outside isn't in good condition and you're looking to replace it, a fresh coat of weather-resistant paint for your exterior might be all you need to prevent moisture from damaging your window. Alternatively, you can install new exterior casings to offer an attractive and functional improvement to your home.

Chipped or Peeling Paint

Window frames and sills are often in close proximity to the elements and suffer from the sun and rain. The peeling of paint around windows is caused by moisture, and is particularly so when exposed wood is involved. Water seeps into the wood and when it evaporates, the pressure beneath the paint film causes the paint to peel. The moisture can be caused by condensation in the interior, or from snow and rain outside. It's important to scrape and sand the surface as soon as you see the paint begin to chip. Some skilled painters add a water-repellent preservative or thinned boiled Linseed oil to the wood before painting to reduce the penetration of moisture and allow the paint to hold better.

When paint begins to crack, it's time to consider repairing your window. To capture any paint that might stray on the surface, put a drop cloth or tarp over the area before applying a new coat. With a utility knife, carefully scrape away any paint. Be careful not gouge the wood underneath or cut through the sheathing. Let the area dry completely after cleaning it thoroughly.

After the area is dry, sand the area again using a fine sanding pad. This will prepare the surface for primer and create a surface that's ready for painting. If you're working with lead-based paint make sure you use proper safety equipment. Clean the sanded area and tape off any other surfaces like baseboards to shield them from paint.

Then, prime and paint according to the instructions on the tin that you are using. Be sure to follow the curing and temperature guidelines on the paint as they will differ depending on the type. Finally, be sure to paint the exterior surface with a paint that is exterior-grade and the interior with an interior-grade.

Window replacement can be costly However, repairing damaged or peeling paint is relatively affordable and can be a viable alternative to replacing the entire frame. If window repair near me are unable to be repaired, it might be worth upgrading to newer energy efficient windows.

Cracked Glass

A broken window leaves your home open to wind and rain, as well as bugs. It's tempting to replace the glass, but you could also repair it yourself if you don't have too severe of a crack or break. It's best to address small cracks as soon as they occur, before they get worse due to time or temperature changes.

There are a variety of ways to make broken glasses almost invisible. But this isn't something that can be done by an amateur. Even a tiny chip can cause a weak spot to the glass, which can result in more breakage and costly replacement. A good solution is to cover the crack with plastic. This covers the crack from the outside, preventing air or moisture from getting through. This could damage the frames or seals around windows.

Before you put on the plastic, put on your gloves and safety glasses and remove the broken pane of glass from its frame. Utilize a utility knife scraper, chisel, or scraper to remove the old glazing points that hold the pane in place. Also, you should employ the knife to cut out any wood that is bare and then clean and seal the area with linseed oil or a clear wood sealer.

Then, you can apply epoxy to glue the glass back to its original position. This is the slowest alternative, but it will also give your glass a more robust look. Choose the double-cylinder epoxy dispenser that dispensing resin as well as hardener equally. This allows you to precisely control the amount applied to the glass, which ensures a strong seal.

If you have double- or triple-pane windows be certain that the gas fills are intact when resetting the glass. These gases are vital to insulating and keeping warm inside your home in the winter, and outside during summer. If you take the window off, the gases will escape and cause it to reduce its energy efficiency. You can replace the gas fills using the same method used for repairing cracks in other kinds of glass.