15 Up-And-Coming Double Glazed Window Repair Bloggers You Need To Keep An Eye On
Double Glazed Window Repair
It's worth checking the warranty that comes with the majority of double-glazed windows. It generally covers any issues with the hardware of the window including hinges and locking mechanisms - within the first 10 years.
A break in the seal is typically the reason for mist to form between your glass windows. This needs to be addressed immediately to prevent damp or mould growing within your home.
Condensation Between the Windows
If condensation develops between the windows in your home, it's an indication that the seal holding the gas that is used to insulate between the panes has failed. This is a serious problem that needs to be addressed promptly, especially in the winter months when humidity levels are at their highest. It could cause damage around the sills and sealant, and even mildew or mould.
Double-glazed windows shouldn't be able to have condensation between the panes. This issue is often caused by excessive humidity or a particularly cold snap. Fortunately, it is fixable without replacing the entire window. A professional can make tiny holes in the window and spray a special cleaning solution inside. The moisture is then removed from the window. An anti-fogger is fitted to prevent the accumulation of moisture from happening again.
Condensation can also happen between the windows as a result of air leakage, or any other cause outside the window. In this case, it may take longer for the condensation in the window to build up since the air must be warm enough to vaporise the water molecules. In these cases, it is better to replace double-glazed windows rather than to try to repair the sealed units.
A double-glazed window is made consisting of two or three pieces of insulated glass held together by a metal frame. The space between the windows is filled with an insulating gas like Krypton or argon, and then sealed. The seal prevents the insulating gas from escaping and also preventing air and moisture from getting into the gap.
As the windows get older, the seals deteriorate and can allow moisture to leak into the gap between the glass panes. When seals fail, it is important to notice this because it indicates that the double glazing no longer performs as well as before. This could lead to a decrease in efficiency in energy use, higher heating costs, damage to the property and the risk of condensation developing between the windows.
Mist
If you notice condensation on the outside of your windows, this is totally normal - it indicates that your double glazing is functioning properly and retaining the heat inside your home. The condensation occurs because the air outside is warmer than the glass, and it reaches the dew point of the window prior to the air inside. This is one of the great benefits of having good quality double glazing.
If you see condensation on the inside of your window, this could be an indication of an issue with ventilation in your home. This is because the excess moisture has no place to go and is deposited on your window, in carpets, in furniture and in other places in your home. Getting this checked out by a professional and making sure that there is plenty of fresh air moving through the home will help avoid it from happening again.
Another reason for mist on double-glazed windows is that the seal between two glass panes is broken. This could be due wear and tear or chemical cleaning solutions being used. If this occurs it is best to have the windows repaired in the shortest time possible.
Repairing your windows professionally will ensure that they remain watertight and free from condensation, fogging and misting. It is also less expensive than replacing the windows, and you will save money on your energy bills.
A FENSA-registered window installer can give you a quote to repair or replace your double glazed Windows. Upgrade your windows to A-rated energy-efficient ones when they are old.
It is a great idea to keep copies of any warranties and agreements with your window fitting company. This can be extremely helpful in the event that any issues with your windows arise in the future, and you then contact your fitters to resolve the issue. This is a far better option than ignore the issues that only make the problem worse and could cause other problems in the home.
Difficulty to Open or Close
It's not just a nuisance when double-glazed windows are hard to open or close. They could also lead to more expensive energy bills due to heat loss and draughts. It could also be security risks, particularly if the locks don't work properly. It is important to repair double-glazed doors and windows as soon as possible.
If you're unable to open your window and have tried the simplest solution like using a screwdriver to prise it open, or tapping the frame using a sharp object, then the problem might be more serious. It could be that the window has shifted in its frame and needs to be reset or there is a gap between the glass panes and the frames. In either case, you must consult a double-glazing repair specialist to ensure the repairs are done correctly and to prevent any further problems.
It's not common for UPVC window handles and lock mechanisms to become stuck or hard to operate particularly when they're old and worn. It is usually caused by the accumulation of grease or dirt in the handle. This can be easily solved by cleaning it with a uPVC cleanser. If this doesn't work, you could try tapping the uPVC with the screwdriver. Be careful not to harm the handle or window handle mechanism.
If this doesn't solve the issue it is likely that the window needs to be replaced as the hinges may not be in the correct position or the locking mechanism could have been damaged. In this situation, contact a specialist UPVC window repair expert.
David The Window Wizard specialises in all technical aspects of double-glazed window and door repair, including fixing a jammed or locked shut double glazing window. He has lots of experience converting old window mechanisms into modern. This can save you money on replacing the entire window. For more information or to request a free quote call or email today.
Warping
Double-glazed windows are an excellent way to save energy in your home. They are made up of two distinct panes that have a spacer, air or dense gas between the panes, creating a seal to keep cold air out and warm air inside. However, over time, these windows may become damaged or broken and require repair. The majority of these repairs can be completed without having to replace the entire window.
A common issue that double-glazed windows encounter is warping. The windows begin to flex or twist or bow.
Repair My Windows And Doors can affect the structural integrity and insulation properties of the windows. Double glazed windows should be installed correctly and maintained regularly to avoid this problem.
Get in touch with a professional when you notice that your double-glazed windows are warping. This will help stop the problem from becoming worse. They can inspect your windows and determine the cause of the warping. They will then utilize specific tools to correct the issue and ensure that your windows are completely sealed.
A common cause of this issue is water vapour between the windows, which can accumulate over time. This could be due to various factors like weather conditions, humidity and temperature variations. To remedy this, the specialist will drill a small hole through the window to let out the moisture. They will then use an agent for cleaning to wash the glass and apply sealant to help keep it dry in the future.
If your windows cannot be shut or opened it could be due to a malfunctioning mechanism or hinges. Before calling an expert to resolve the problem, it is worthwhile to grease these parts. This can often resolve the issue and reduce your need for replacements. If your windows are worn out or don't provide the insulation you want It may be better to replace them.