10 Kia Picanto Key Fob Replacement Tricks Experts Recommend How to Replace a Kia Sportage Replacement Key

The key of a lot of Kia models comes with the keyless entry feature built in. The key is usually akin to an electronic remote and is able to be replaced with a brand new one from a Kia dealer or a locksmith.

Key fobs can stop working for a variety of reasons, such as a dead coin battery worn buttons or buttons, signal interference, water damage and a malfunctioning receiver module. Here are some suggestions on how you can get your Kia Sportage replacement key working again.

How do you replace the remote key or smart key

If your Kia is equipped with an intelligent key, remote key, push-to-start key, or a regular non-transponder metal key The battery inside these keys will eventually require replacing. This is particularly true if your car displays a message that indicates the smart or remote keys aren't powered.

It's a relatively simple process. To replace the battery of the keyfob remove your mechanical key from the slit on the back of the fob. Then, pry the cover open. Inside the key fob will be a small screw that holds the battery in the correct position. By using a small screwdriver remove the screw and remove the old battery. Insert the new battery and then close the cut on the key fob.

Test the key fob by pressing the lock/unlock buttons. It's good when the doors lock or unlock as you expect. You can now utilize the Kia's hands-free lock/unlock feature whenever your fingers get chilly or you have to do some errands in Brandon.

Not all keys may require to be programmed (transponder chips or smart keys). This requires a specific programming machine that only the dealer or locksmith can access. Other keys (non transponder metal keys) don't require programming. If you need to reprogramme your key, you'll need note the key code number on the tag for the key code.

How do I replace a battery

If your Kia key fob isn't responding to pressing the lock or unlock button on the fob, this is a sign that the battery should be replaced. A low battery may also cause other issues, such as the check engine light flashing on or a delay in cranking the engine. It is easy to replace the key fob batteries using just some tools.

Before starting the process, make sure that your vehicle is off and that all doors are closed. Find the small, metal or plastic piece on the bottom of the key fob. Move it until the metal key falls out. Then, you can put the key into the door handle of the driver to unlock your car.

To replace the key fob battery, take off the cover on the rear and use a plastic pry bar tool to remove the latch that holds the black negative battery cable. Remove the old battery and align the new battery to ensure that the "+" positive side faces you, and the "negative" negative side is facing towards the fob's metal electrical contacts. Avoid using excessive force when pushing the new CR2032 into position to avoid damaging or bending the metal contacts.

After you have installed the new battery and turning the key fob off and on in the ignition until the door locks cycle. Then you can test your Kia key fob to see if it is working properly again.

How do you replace the smart key?

Depending on the model of the Kia Sportage, you may have the standard key fob, or a smart key. The difference between these is that the smart fob has a small mechanical key blade in it, whereas the standard fob isn't equipped with. Both types of key fobs have batteries that will eventually need to be replaced. Fortunately, it's quite simple and takes just two minutes.

Be sure to turn off your Kia and be on a flat and well-lit surface prior to you begin. Keep in mind that there are small parts inside the fob that can be removed if not careful.

The first step is to locate the small release button that is located on the lower backside of your fob. www.g28carkeys.co.uk could be an oval silver button or a rectangular slot. You can open the key fob by pressing the button.

After the key fob has been opened, remove the battery that was in it. The new battery is a C2032, and can be bought through the internet or at a local auto parts store. After you're done, your key fob should permit you to lock or unlock and start your vehicle, even if it isn't running.

How do you replace a broken mechanical key


The Kia keyfob is a wonderful convenience that lets us lock or unlock our car by simply pressing the button. Like any other device it is possible that the Kia key fob might have issues. There are ways to solve these issues and keep your key fobs working for the duration of.

One of the most common problems is a low or dead battery. This can cause the fob to stop working completely or work intermittently. If this is what you are experiencing, replace the battery with a new one.

If this does not resolve the issue, try using a standard flathead screwdriver to wedge the fob's casing made of plastic open. Be careful not to damage any internal components or scratch the plastic. When the battery is open, carefully take off the battery that was removed and replace it with a new one.

Close and open the door with the mechanical key. (Every Kia fob comes with an emergency mechanical key which will fit into the slot). Test the key fob to ensure it's working as intended. Contact a dealer or locksmith to address the issue when the fob still is not working. To avoid future lockouts, ensure that you have an emergency key that can be able to work with all trunk and door cylinders.