How To Make An Amazing Instagram Video About Double Glazing Door Lock Repairs Double Glazing Door Lock Repairs

Are your uPVC door or window mechanism not working properly? Perhaps the handles on your uPVC windows and doors are not aligned properly or are difficult to use.

You'll be wasting energy if your double-glazed doors don't perform as they should. This can also increase the chance of burglary. Owen the Locksmith can fix your door lock at a reasonable price.

Snapped Key

It can be frustrating when a key snaps inside a lock. It could also be an issue for security, since the door may not be locked and make you open to intrusion. There are a few quick solutions you can use to fix the problem and get your door working again.

The first step is to remain calm. If you panic and begin doing a lot of fumbling around you may end up pushing the damaged piece of the key further into the lock, which could make the situation much worse.

Spray WD-40, or another penetrating lubricant, into the lock. This will help the broken piece to emerge more easily. You can also employ a screwdriver in order to break pieces that could be blocking the way. If you have a part of the key that is stuck, grab it with a paperclip or another thin metal object and pull it. Both of these methods work well, but be cautious not to push the damaged piece of the key further into the keyway.

Some paperclips have grooved edges, which can work in a pinch as hook extractors and some Jigsaw blades can also be used for this function. If you don't happen to have any of these items, you can bend a hook using needle-nosed pliers. Also, a pair tweezers can be used to grasp and pull out the last part of the broken key.

If you are unable remove the broken piece of key, use a lock deicer. It's available at most hardware stores and is used to freeze any moisture present within the lock.

If none of these solutions seem to work, it could be time to contact a locksmith. The experts at Fitlocks can quickly fix problems such as broken handles or snapped keys with uPVC locks and door mechanisms. They can also reconfigure the double glazing door mechanisms to ensure that they are easier to use. Book a double glazing repair via our website, or give us a phone call to discuss your needs.

Broken Cylinder

A broken cylinder can pose an extremely risky security issue. It's a good thing that it's a simple repair for professional locksmiths to complete. Locksmiths will need to tap the cylinder in order to repair it. This can be done with the hammer or other tool. However, the most effective method is to make use of a wire or a long match. Then, place the end of the match or wire near the keyway. After that, the locksmith will strike the lock and break it open. This is superior to using the hammer, which could cause damage to the lock.

The most frequent cause of cracks in the cylinder head is overheating. This can occur when the cylinder block and cylinder head are made of different metals, such as cast iron and aluminium. When different metals heat up and cool down at different rates, it may create hotspots locally that expand faster than the rest of the cylinder head, leading to cracks.

Another possible cause of cracks in the cylinder is corrosion. If the cylinder head as well as cylinder block are not properly maintained, it can cause corrosion or rust and cause them to expand at a higher rate than they ought to. Over time, this can cause cracks.

If your uPVC window or door lock is brittle or requires a lot of pressure to turn, this can be caused by a number of things. A defective locking mechanism, misalignment or the wear of the handle are typical causes of this issue.

This is a simple and cost-effective fix that a majority of double glazing owners can do. A professional locksmith should be able to resolve this issue within a matter of hours of arriving at your home. They can repair the locking mechanisms, or change the window handles and change the gearboxes, based on your specific needs. A locksmith with experience will always be able to advise you on the most cost-effective solutions for your home. They may suggest upgrading to 3 Star TS007 Euro Cylinders that give you an extra layer of protection against burglars. It's a small amount to get the peace of mind that comes from knowing your uPVC door is secured.

Broken Handle

Window handle locks are complex mechanisms that deteriorate with time and usage, so it's no surprise they occasionally break. It can be difficult to determine the reason behind the broken window handle lock and repair it correctly.


If the issue is with the internal locking mechanism or the latch, fixing the broken handle will increase your uPVC double glazing door's security and allow you to stop the draughts. Incorrectly repairing or replacing your handle can be very expensive and could cause damage to the door's frame and lock, so it's worth taking some time to make sure you do it right.

With the window in the open position then loosen the screw that secures the handle with a screwdriver. The screw should be on the inside of the backplate, which is usually hidden by a screw cap to enhance the appearance. Be sure not to lose any of the internal components within the handle, like the plates or levers that are on either side of the spindle. Keep them in the same arrangement so that it is simpler to replace them in the event of a need.

Then, turn the handle so it's at 90 degrees to the window frame. Finally, loosen the screw at the back of the handle which holds it to the internal spindle using another screwdriver. Once the screw is loose, pull the handle out and take out the broken spindle. Replace it with a new one, making sure that it's the same size as the old one (you will typically find them on the internet or in hardware stores) and securely screw it in place. Do not tighten the screw too much as this can harm the handle as well as the window frame.

Close the handle and try it. The hope is that it will function smoothly and you'll be able to open your window once more.

While you're working on the handle, make sure to make sure your uPVC windows are closing properly. If they're not closing properly then you may experience draughts and damp in your home as well as compromising your home's energy efficiency. Core Sash Windows is a local window company that can alter the hinges of the frames of your windows to ensure that they close properly.

Broken Spindle

It is more typical for the spindle to break rather than the handle. This is most frequent in uPVC tilt and turn windows. These windows require a handle that acts as an locking device within the window frame. The handle is attached to a central rod that triggers the cams with a mushroom shape that lock into the window frame keep. If the dead latch mechanism fails to open after the handle has been turned, it is likely the spindle is damaged. This could be a frustrating problem.

Luckily there are steps that can be taken to remedy this situation. A good locksmith can quickly and efficiently fix this problem. They will be able to take apart the window handle using a tool to remove the wheel component of the mechanism where the spindle is. This can be done without damage to the handle or window frame.

After removing the wheel the technician can inspect the spindle and identify the reason for its break. This involves disassembling the spindle, and then examining each component, noting any damage or excessive wear. This process is usually carried out by technicians working in a clean and safe environment.

The next step is to clean the damaged spindle. This helps eliminate any dirt or debris that could be hindering its normal functioning. double glazing repairs near me can then be repaired or replaced. If the technician is replacing the spindle, it is possible to use a dowel that is the same size to the original. Then, he will drill matching holes into both pieces. This will ensure that the new spindle has an exact fit with the handle.

If the damaged spindle cannot be repaired, it could require replacement completely. Home centers can sell generic replacements but if the window design is unusual you'll have to speak with an expert in cabinet making or woodworking who can recreate the exact part. Once the new spindle is in place it can be attached to the handle by line up the screw holes in the handle with the frame's existing screws. Once the handle is securely seated, you can operate your uPVC windows.