10 Amazing Graphics About Double Glazing Locks Repair Double Glazing Locks Repair

When a double-glazed window will not close, it causes draughts that allow valuable heat to escape. This also weakens the security of your home and puts you at a higher risk of burglary.

Double glazed window seals, hinges and handles can become damaged over time. If this happens it could affect the functionality of your windows and invalidate any warranties you might have.

Locks with a problem

While many people take great care when installing anti-burglar security systems for their gates and main doors, it is often overlooked that the windows are prime targets for burglars. Faulty locks can cause drafts, let heat escape and weaken the security of your house.

If you're uPVC windows locks don't work, it is likely that the lock mechanism is blocked. This usually occurs because of a crack in the gearbox component. This could cause the handle not to open, but to rotate 360 degrees. This is a problem that is common to uPVC windows, but it can also happen in tilt-and-turn windows as well as sliding sash window.

If this happens, it is possible to release the lock by applying pressure on the lever handle. This can allow you to free the gear box and allow the window's opening. If this does nothing it is possible to replace the entire mechanism of the window lock.

Most modern uPVC windows use espagnolette locks. These are an internal locking system that secures the window by using locking cams that resemble mushrooms that are built into the frame. The handle operates the gearbox, which causes the cams, causing them to move upwards or downwards. The spindle of the lock may break, causing the handle not to move, but the window to either open or close.

A damaged gearbox may cause your window to appear locked, but isn't actually. This is usually the case when the centre rods (sometimes known as crocodile teeth fixings) within the gearbox have broken off. Misty Glaze will supply and install replacement rods in the event that this occurs.

It is not advisable to force an unbreakable lock or stuck lock. This can cause the lock to snap or break, especially if you have a uPVC windows that expands and contracts as temperatures change. It is best to call a professional locksmith who can diagnose the problem and repair it.

Sticky Doors/Window

Sticking doors and windows are an extremely annoying problem but they can also be a sign of more serious structural problems. If you find it difficult to open or close a door or window, it's important to seek professional help immediately. This issue can be caused by a number of factors like foundation settlement or a lack of support for the crawl space.

Frame problems or humidity can cause windows and doors to become stuck. When exposed to moisture, wood frames can warp. Even if your hardware appears nice, it can make it difficult to open and close your frames. If this happens, the wood swells and presses against the hinges, creating friction.

Rub the window or door with soap to decrease friction if it gets stuck in summer. This will allow it to shrink and may resolve the problem temporarily. This procedure may have to be repeated frequently during times of high moisture.

Sanding the frame of the window or door to a smooth finish is a more permanent fix. This can be done by hand or with an electric tool. A professional can also stain and sand or paint your window or door frame to get it looking like new.

If sanding or soaping doesn't aid, the issue could be caused by foundation settlement or a compromised crawlspace. Look for cracks in the area. If you see these indications, you need to call in a foundation repair specialist. Foundation damage can result in uneven floors, misaligned walls and stuck windows and doors. To avoid the need for expensive and dangerous repairs, it's crucial to address these problems as soon as they can be addressed. If not addressed these issues can escalate to the point that your entire home is structurally unstable. Contact the Southeast's most renowned foundation repair specialists today to schedule an inspection and repair!

Cracking/Blowing Issues

When double glazing starts to deteriorate, it may cause cracks to form. This can be a snazzy sight and also let all the heat from your home to escape. It also poses an hazard for your family members, as the glass's sharp edges could injure them when they break. It is better to fix double-glazing windows with a crack before they get any worse. This will increase the cost of replacement.

Window seals are crucial to prevent drafts from entering your home and to keep air between your window panes. Over time, the seals will shrink or eventually become perished because of changes in weather. Unchecked, it can result in condensation, moisture and draughts within your home.

double glazing repair can usually be solved by a professional. They can replace the window seal in order to restore your windows back to their original state of repair. They will also suggest other features that will decrease the likelihood of a stress crack occurring in the future, such as trickle vents for better ventilation.


You can also try lubricating the hinges and handles on your doors and windows. This will enable them to move more easily and allow the lock to function as it was intended. Rub lubricating oils onto a lint-free cloth and rub them into the hinges, handle mechanism and places where they go through frames (for example for sash window). It may also be beneficial to remove handles from the frames and clean them with warm water to rid them of any dirt or grit that has become stuck to them.

It is essential to speak with a professional if you find that your uPVC doors and windows are not working as they should. They can pinpoint the issue quickly, and then solve it in a short time. It's much safer and cheaper than attempting to fix it yourself, and possibly damaging the mechanisms. You'll also be able to rest in peace of mind knowing your home is secure and secure.