10 Meetups Around Upvc Door Handle Replacement You Should Attend Choosing the Right UPVC Door Handle Replacement

It's simple to replace your handles made of upvc however, choosing the correct handle can be a bit difficult. Modern double-glazed handles include spring cassettes within the handles, but older ones don't.

If the handle made of upvc on the multipoint lock is loose and floppy, there may be an internal problem. This article will discuss a number of potential problems & their causes.

Handles that are drooping or sagging

UPVC handles are susceptible to wear and tear. This is especially true in older properties. The most common reason that the handle becomes floppy due to a broken spring cassette within the door lever. This is caused by a lot of force, and the square spindle holding the cassette can be displaced or rounded.

It is a good thing to be aware that a uPVC handle replacement can be done in just a few minutes. The first step is to remove the old handle unit. To remove it, you must unscrew the fixing screws visible on the backside of the lever. After the handles have been removed, you can take them off and replace the cassette.

On the internet, you can pick from a wide selection of uPVC handles available in a variety of finishes. Choosing the right finish will determine the length of time the handle will last and how easy it is to keep clean. Finishes such as PVD, Stainless Steel or Resista are made to withstand corrosion and will last up to 25 years.

After choosing a color or style, you are able to select the type of handle that you need. The most popular kinds are lever and pad arrangement. Lever pads are equipped with a lever on the inside and a paddle on the outside which is typically employed as a security measure to block access by unauthorised persons.

The next step is to determine the dimensions of your existing handle and record them. You'll need to measure the PZ dimension which is the distance between the screw hole and the centre of the lever. You'll also need to be aware of how long the handle is and the dimensions of its keyhole. Once you know the measurements, you can then compare these with the handle sizes matrix to determine the right replacement.

Broken springs

Over time, the handles of uPVC doors can get loose or wobbly and sometimes the spring cassette inside might break. These springs help align the handle lever in a horizontal position. Without them the doors won't lock properly.


Modern uPVC handles come with these cassettes built directly into the back plate. However, older uPVC doors typically include these springs in the lock mechanism. This isn't something you can be fixed by yourself but it's worth asking your locksmith to look as this could be the reason behind the sagging or drooping uPVC door handles.

One of the most common issues that is commonly encountered with uPVC door handles is that they get loose or wobbly with time, and this is usually due to worn out springs that can be easily fixed. Generally the reason for this is excessive use of the handle and as a result the square spindle inside the handle will wear away and the springs will shift out of position.

To fix this issue, you'll have to open the door to the handle plate and unscrew all screws. This can be done using the help of a Philips screwdriver. After the screws are removed, the handle can then be taken off. upvc door handle for the handle can then be taken apart. Then you can take off the springs that were in use and replace them with new ones.

Depending on the type of handle you are using the distance between the two screws may differ and it is crucial to know prior to buying a replacement. This measurement is known as the PZ measure. It is recommended that it be measured using a calibrated tape measure for accuracy.

After replacing the springs you should be able operate the handle with no problems. It's worth lubricating the internal mechanism to ensure that everything is working just as it should. This will ensure that your uPVC door is as safe as it is, and make them more comfortable over time.

Handles that slide around

Handles that slide are caused by many things. One of the most common causes is that the levers of the handle are not aligned with the lock. This is a problem that can occur with both uPVC and composite doors, but is typically more evident on older doors since they are often made from cheaper materials that don't stand up well to the elements.

This issue can be resolved by a professional who will realign the handles and make sure they're in line with the door lock. They'll also inspect the lock itself to determine if there is anything that requires fixing. In many cases, a minor adjustment to the handle springs can fix the issue.

The replacement of your uPVC door handle is easy enough, but it's crucial to measure the measurements of the handles you have in place to ensure that you have the right size replacement. You'll need to determine the distance of the two screws, the dimensions of the keyhole and lever, and the distance between them. Then, you can make use of this uPVC handles size guide to find an appropriate replacement for your home.

Once you have the measurements, the next step is to take off the old uPVC handles. It's usually a simple process and only requires the use of a screwdriver. After the screws have been removed, you will need to unscrew the handle and then replace the new one.

It's important to secure the door with an appropriate wedge prior to beginning. This will stop it from closing during the course of your work. After you remove the handle, you can access the parts beneath the door that are causing the door to slide.

If you don't have the patience or nerves to tackle this job yourself, a handyman from Fantastic Services can help. They will employ specialist locks to open the doors without causing damage. Then, they'll replace the damaged handle and make sure that everything is working exactly as it should.

Damaged gearbox

A damaged gearbox may cause the door handle made of upvc to become stiff or lose functionality. This can also prevent the lock from being able to be opened using a key. This can be dangerous and should be addressed as soon as is possible. It is essential to contact a locksmith if you cannot resolve the problem yourself. They have the tools and know-how to do the job right.

The first step is removing the handle from the cover plate. This can be accomplished using a screwdriver equipped with flat heads. After you have removed the handle, remove the middle screw which holds the barrel. After removing the middle screw, you'll be able to loosen the two screws which hold the barrel. Then you can take the barrel out of the door. To accomplish this, you'll require someone to hold the door open.

After you have removed the cylinder and replacing it the cylinder with a new one. It is essential to ensure that the new cylinder is the exact size as the old one. You may end up with an incorrectly aligned handle. This could cause numerous issues, including leaks and draughts.

A lot of doors made of upvc have adjustable slots that can be used to adjust the handle's tension or release. These slots are usually found on the inside of the doors, near the place where the handle connects with the cylinder. Allen wrenches can be used to tighten the slots of adjustment. After you've made the required adjustments you can screw the handle back in and then put it back into its place. You can then test the handle and make sure it functions as intended.

If the door handle made of upvc is loose or sloppy when closed, this is usually an indication that the gearbox in the upvc has been damaged or the internal spring components are in the process of breaking down. This could cause your multipoint locks made from upvc to fail, leaving your door wide open to intrusion. In this case the upvc gearbox will require replacement. The cost will range from PS145 between PS145 and PS280 inclusive of labour.