15 Up-And-Coming Replacement Door Handles Bloggers You Need To Watch How to Replace Door Handles

The door handles in your home are an important element of your design. A new handle can bring your home's decor modern.

Over time, your knobs for your doors can begin to feel stiff or even break. These are indications that it's time to change them. This guide will help you select the appropriate replacement door handle for your home.

Door Knobs

Door handles add to the appearance of your home, while making it easier for people to open and shut doors. They are available in a variety of finishes, colors and styles that will complement your decor. If yours has begun to show signs of wear or require an upgrade, you can replace them in a couple of easy steps.

The first thing you have to find is the spindle or shaft through which the knob is affixed to the door. Some have a small hole that you can insert a narrow screwdriver into to loosen the set screws that hold the handle in place. Some have a small slot or hole that allows you to press the spring-activated detent pin using flathead. When you press the pin it opens the latch mechanism and lets you pull or push on the knob.

Once you have the spindle or shaft in your hands Remove the knob and replace it. Align it correctly and check that the latch is working properly before tightening new set screws.

Once you've replaced the knob, place the latch rod in position over the door's hole and then lock it using the rod mechanism on the second knob. Make sure upvc replacement door handles Repair My Windows And Doors are aligned then thread the latch plate screws and tighten the screws.

Some people choose a brushed or smooth metal finish for the door hardware to give their home a sleek and contemporary style. This can be matched with their other furniture. Some prefer a rustic look that goes well with farmhouse-styled rooms. If you have a member of your family with mobility issues, you may want to choose the lever or rim lock that require less pressure to operate.

Other aspects are being considered more and more for the design of door handles. Infection control and accessibility have been major considerations when it comes to developing new designs for handles. For example, some handle designs can be operated by an arm.

Latch

The latch that holds the handle of your door open may wear out as time passes. Changing out the old latch to accommodate an entirely new handle can be a simple DIY job and it will make a significant change in the way your door opens and closes.

Depending on the kind of handle you have, the latch may be part of the knob or it could be an individual piece attached to the door itself. In either scenario, the same procedure for removing and reinstalling is applicable. It's easy to remove the old latch, particularly in the case of an entry handle that has a "magic" button. This little pressure-slot, located on the side knob, is the one you'll need to press in order to pull the latch out of the handle.

If your handle does not have this button, you will need to remove the cover plates that are placed over the latch plate. These are usually circular or rectangular and can be removed using a screwdriver in order to remove them off of the handle. Some have a slot where you can place your screwdriver. Other handles just snap off.

Then, unscrew the machine screws that hold the latch and the plate to the door handle. You'll need to keep these screws with a pointed tip in a secure location in order to reuse them in the future. After the screws are removed, you are able to remove the latch plate and the mechanism from the hole and put it aside.

You can now begin installing the new latch. Install the latch plate into the door hole and secure it with the hardware provided. Make sure the square pin on the inside of the latch is facing the latching mechanism inside the handle, and that it lines up with the other screw chambers in the door handle. Then push the exterior latch plate onto and secure it using the provided screws.

Strike Plate

One of the most frequent reasons to replace the door handle is that it is loose or isn't locking properly. This is typically caused by incorrectly aligned parts of the latching system, for example the strike plate being too short or has moved up or downward on the doorjamb over time. This project allows you replace your old strikeplate with an extended one, which will provide more security for your door and will keep it closed.

Apply a lipstick or another marking material on the bolt that you are using to check if it is the strike plate. Close the door and attempt to latch it. If the mark is below your strike plate hole, it indicates that the plate is too small and the door will not latch. If the mark is above or below the strikeplate hole, the strikeplate may have been moved up or downward on the doorjamb.

You may be able simply to put the new strikeplate in the old one using the screws that come with it, depending on the door. You may need to first drill holes and then chisel a bit of wood to ensure a tight fit. If this is the case, be careful to not be too rough with the chiseling process or you could damage the strength of the doorjamb.


Installing a brand new box-style strike plate will give the lock a stronger grip on the doors and will require more force to open them. Typically, it requires two longer screws to secure the strike plate to the frame of the door. You'll need remove the old strike plate, then drill and chisel the wood to create space for the new one.

This strike plate is specifically designed to work with rim locks from the past, and it's made from sturdy solid brass in the heavy duty thickness. This kit comes with wood screws as well as machine screws, allowing you to pick the right hardware to suit your needs. Be aware that the wood screws have a pointy edge, whereas the machine screws are more blunt.