12 Stats About Replacement Door Handles To Make You Take A Look At Other People How to Replace Door Handles

The door handles of your home are an important element of your design. upvc door handle can bring your decor and space up-to-date.

Over time your knobs on your doors may begin to feel stiff or even break. These are signs that it's time to replace them. This guide will help you select the best door handle replacement for your home.

Door Knobs

Door handles enhance the look of your home, while making it easier for people to open and shut doors. They are available in a wide variety of colors, finishes and types to match your decor. If yours is beginning to appear worn or simply require an upgrade, replacing them is relatively simple and can be completed in just a few steps.

You'll need to find the spindle, or shaft, through which the knob is inserted to the door. Some knobs have a tiny opening that can be used with an screwdriver to take out the set screws that keep the handle in place. Some have a thin slot or hole through which allows you to press an activated detent pin that is spring-activated using a flathead. This pin releases the latch mechanism, and lets you to pull or push the knob.

Once you have the spindle, or shaft in your hand Remove the knob and replace it. Check that the latch functions properly before tightening new set screws.

After replacing the knob, you can place the latch rod over the door's hole. Interlock it with the rod system on the second knob. Make sure that the holes are lined up and then thread in the latch plate screws and tighten them.

Some people opt for the smooth or brushed finish on their door hardware to give it an elegant, modern look that matches other furnishings in their homes. Some people prefer a rustic look that works well with farmhouse-style rooms. If you have a member of your family who has mobility issues, you might want to choose the lever or rim lock, which requires less pressure to operate.

Other factors are being looked at more and more when it comes to the design of door handles. Accessibility and control of infections are key issues that have led to the development of new designs for handle handles including ones which can be operated by the forearm of a person.


Latch

The latch that holds the door handle open may wear out over time. Switching out the old latch to make room for a new handle can be a simple DIY job and will make a significant change in the way your door opens and closes.

Depending on the kind of handle you have, the latch may be part of the knob itself or it could be an individual piece attached to the door. In either situation, the same procedure to remove and install will be used. Getting the old latch out of the way is relatively simple, especially if your door handle has what's called a "magic button". The tiny pressure-slot, which is located on the side knob, is what you will need to press in order to pop the latch out of the handle.

If your handle doesn't have this magic button, the first step is to remove any cover plates that sit over the latch plate. They are typically rectangular or circular and can be removed using the help of a screwdriver. Some have a small slot inside that you can put your screwdriver, whereas others snap off.

Next, you will want to remove the two machine screws holding the latch and the inner plate to the door handle. You'll need to keep the screws that are shorter and have an angled tip in a secure location so that you can reuse them in the future. After these screws are removed, you can take the latch plate and mechanism out of the door's hole and place it in a safe place.

Now you can begin installing the new latch. Install the latch plate into the door hole and secure it using the hardware supplied. Make sure that the square pin that is on the interior of the latch is pointing towards the latching mechanism inside the handle and that it lines up with the other screw chambers of the door handle. Then push the exterior latch plate on and secure it using the screws supplied.

Strike Plate

It is typical to replace a door handle because it is loose or isn't locking properly. This is usually due to malfunctioning components of the latching mechanism, for example a strike plate that's too small or shifted up or down on the doorjamb over time. This easy project allows you to replace your existing strike plate with a longer, new one that can provide greater security and ensure that your door stays shut.

Apply some lipstick or other marking material on the latch bolt to check if it is the strike plate. Close the door and attempt to latch it. If the mark is below your strike plate hole, it indicates that the plate is too small and the door will not latch. If the mark is higher or below the strikeplate hole, the strikeplate may have been moved up or downward on the doorjamb.

Depending on the door you have depending on the door, you might be able to simply attach the new strike plate in place over the old one using the screws included with it. But, you may have to drill holes first, and then chisel some of the wood to make sure it's a good fit. If this is the case Be careful not to chisel out too much wood or you'll damage the strength of the doorjamb.

Installing a new style box strike plate will give the lock a stronger hold on the doors and require more force to open them. Typically it will require two longer screws that secure the strike plate to the frame of the door. You'll have remove the old strike plate, then drill and chisel the wood to create space for the new one.

This hard-to find strike plate is made from solid brass and has a thick, heavy-duty. It's specifically designed to be used with antique rim locks. This kit includes wood screws as well as machine screws, so you can pick the right hardware to suit your needs. Be aware that wood screws have a pointed tip, while machine screws are more blunt.