It's The Window Repair Case Study You'll Never Forget Window Repairs

Window repairs can help homeowners save money and maintain their comfort. Window replacement may be necessary in the event of serious damage like broken glass or a shattered window frame.

But there are many other issues that can be repaired to extend the lifespan of your windows. Some common issues include:

Cracked or Broken Panes

Glass that is cracked could be caused by a lawnmower that throws errant rocks or by branches of trees being blown by strong winds. This is not only visually awful, but it could also lead to more energy costs because broken glass lets cold air into your home. Luckily, it's usually relatively easy to repair windows that have damaged panes.

Begin by carefully removing glass using gloves and sunglasses. You may need to make use of a utility knife in order to break loose any remaining putty or old glazing compound that has accumulated around the edges of the frame. Then, use a gentle paper towel or cloth to wipe the glass's surface and the frame's wood.

Once the frame is clean and dry, apply a waterproof silicone caulking on the frame's perimeter. This helps prevent water from getting in through the crack, which can cause further damage to the frame and the glass.

A crack that is severe in double-paned glass can cause gas to leak between the panes, making your windows less insulative. If the crack is serious enough to compromise the quality of the glass or in the case of an inner pane that's totally missing, it's time to contact an expert.

Cracks caused by thermal stress can happen when there's a dramatic difference in temperature between the outside and inside of your home, causing the glass to expand or contract. If the cracks are located on two sides of a window, it is best to replace it rather than try to repair it.


Clear tape can be used to fill cracks in windows that are not yet ready to be replaced. It also keeps out bugs and cold wind. You can also cut a piece of nylon stocking or tarp large enough to cover the crack, and stick it to the wall using duct tape. This is not an end-to-end solution, but it can keep insects out and cold air away from your home. If you notice cracks appearing on your older windows it is recommended to contact your local company to see if replacing the whole window is the best option.

Rotten Wood

Wood rot is a common issue with windows. It can alter the appearance of a house and also pose an hazard to safety. It is possible to fix the wood that has rotted. First, you must identify the cause of the wood rot. Look for leaks on the roof and other places where water can enter the wood.

You will then need to take out the rotten components of the window frame. This can be accomplished with a rasp, chisel or claw hammer. After the rotten areas have been eliminated it is time to replace them with new wood. It is recommended that you make use of pre-treated wood for this task as it is more resistant to decay. If you are not able to replace the wood damaged by rot, you can try using wood filler or hardener to strengthen the damaged area. This kind of product will be available at most hardware stores. Follow the instructions on the label of the product to achieve the most effective results.

After you have repaired the damaged areas of the window sill, it's crucial to protect the area. Apply a water-resistant sealant to the wood. A product like Sikkens is a good choice to accomplish this task.

It is also possible to use an epoxy filler that is two-part to protect the wood from further damage. It is simple to apply and gives an excellent finish. It is essential to follow the directions on the label. Once the epoxy filler has dried you can sand the wood's surface. Start with a rough sandpaper, and then move on to an easier grade.

The final thing you would like to do is make the rotted area even worse by exposed to more water. Therefore, it is a good idea to cover the repaired area with an oil-based primer which will shield it from moisture. Then, you can reapply the waterproof wood sealant.

Won't Open

The reason a window won't open could be due to a variety of factors. double glazing repairs Weybridge can warp when exposed to wet weather, the house might have sunk or someone could have closed it to protect themselves. With a little patience and the right tools, you can unlock most stuck windows.

One of the most frequent causes of windows that isn't opening is the accumulation of gunk or debris on its moving parts. Dirt and grime build up on the sliding tracks, hinges and locks over time, according to Acme Glass. Additionally, metal hardware is prone to rust when it comes into contact with humidity or direct sunlight. Spray grease on these areas to aid in preventing oxidation and ensure that your windows are operating correctly.

The pulleys that raise or lower the window can become loose, or even break. These components can lose their tension and cause obstruction especially when the window is situated at least two stories above the ground.

If you have trouble opening a door, use a pry-bar to gently open the window. Place a block on the frame of the window to give the pry bar more leverage. Be careful not to scratch the wood or the window. Alternatively, try running a hair dryer across the edges of the frame for a few minutes to warm the wood and allow it move more easily.

A damaged spring can be the cause of windows that aren't able to lift or lower. You will need to consult the owner's manual for more details depending on the person who made your windows.

If you've tried cleaning and lubricating the moving components on your windows, but they cannot open, it's time to replace windows. Homespire Windows & Doors offers energy-efficient replacement windows. Don't let the windows of your home go from functional to unusable. If a window isn't properly closed could leave your home vulnerable for water damage and burglary. Contact us for more information on our windows replacement services and products today!