Wall Fire Place Electric: The Secret Life Of Wall Fire Place Electric A Wall Fire Place Electric Adds Warmth and Style to Any Room

A wall-mounted fire place creates a warm and inviting focal point for any room. It can be hung on the wall flush or partially recessed. Follow the manufacturer's guidelines for framing the fireplace before installing it on the wall, in the event that it is recessed.

The process of installation is similar to hanging a TV or shelving, and many models will require an electrician to hook up the electrical wire.

Easy to Install

A wall-mounted electric fireplace is a great way to add warmth and class to any room. It is simple to install and does not require gas lines or exterior venting. It comes in a variety of sizes and styles to fit any room in the house. It is essential to take into account the location of your house before choosing a particular model.

If you are planning to put an electric fireplace above your TV, ensure the screen is big enough to hold it. Think about whether your furniture could block the fireplace's view. A wall-mounted fireplace can help you save floor space and give an open space within your home.

Installing an electric fireplace that is recessed can be easy if you follow the instructions included with it. First, you will need to frame the opening for the fireplace with 2x6s that are one inch smaller than the finished wall. Mark the center of the rough fireplace opening, and the stud positions at every 16 inch intervals across both plates. After you have framed the opening, use a level to ensure that it is level. Then, hang the mounting bracket and screw it into place. If your fireplace has side brackets, remove them to access the screws to fasten.

After you have hung the fire unit, attach it to the mounted bracket using large washer head screws and wall anchors. Ensure that all of the screws are placed into a solid backing. You may need to add an outlet to the wall. This can be accomplished by a licensed electrician according to local codes.

If you do not have carpentry skills, hire an expert to construct the fireplace wall or build frames in an existing wall for you. They can also install drywall, tape and mud your walls before you install your fireplace. You can also paint a wall to give it a more finished look. Once you have completed these steps, your fireplace will be ready for use.

Easy to Operate

A wall mounted electric fireplace is simple to operate. A majority of models come with an remote control that controls the flame effects. electric fireplace with wall mount come with an impressive smartphone application which lets you control the fireplace from any location. Some models can also be controlled via voice using Amazon Alexa or Google Assistant. These features make wall-mounted electric fireplaces a wonderful addition for any home.

Review the installation guidelines for your specific model prior to you begin. Certain models may require a professional installer but others are fairly straightforward to install on your own. Before you start, it's essential to understand the weight of these units and ensure that your walls can withstand them. Also, be aware of the direction the heat will be moving and if there are any combustibles in the vicinity.

Certain wall-mounted fireplaces are able to be connected to an outlet, whereas others need to be wired. If you're not sure whether you're able to safely do this yourself, consider hiring an electrician who can do the job. Based on the model you may need to do basic framing or bump out to accommodate the plug and electrical cord.

The position of your fireplace could influence its appearance and performance. Some people prefer having their fireplaces at eye-level when they are seated on the sofa. If this is your situation it's essential to ensure that your TV can be set up above the fireplace without causing damage.

To determine if your walls can support a wall-mounted fireplace it is possible to drill a small exploratory hole in a discrete area of the wall. then use a spirit level to mark the position where you'll mount the brackets. You can then check whether the wall is drywall or stud and make sure you have an outlet with three spots within reach of the fire's cord.

Easy to Clean

Modern electric fireplaces that are corner-mounted are much easier to clean than their wood-burning or gas counterparts. wall hanging electric fireplace is that they don't use anything, which means they don't create ash and creosote build-up. However, they need to be cleaned periodically to keep them looking and functioning at optimally. Fortunately, the cleaning process is simple and doesn't require any harsh chemicals. You can make use of a cloth slightly dampened with water to wipe down the exterior of the fireplace, and a dry cloth to clean dust from the inside of the fireplace.

In the beginning you must ensure that the fireplace is fully cool before beginning to clean it. Unplug the fireplace or, if wired, turn off the circuit breakers that supply power to it. Avoid using any liquid cleaners on the grates, as they could pose an electrical risk. Use a lint-free, non-scratch cloth that is lightly dampened with or lukewarm water. Avoid using any cleaning products that contain substances that are abrasive, since they can scratch the surface of your fireplace.

Then clean the grate with a damp towel. It is also possible to clean the glass's sides and any other areas of the fireplace that aren't covered by the grate. You can also use the soft brush attachment on the vacuum cleaner to clean dirt and dust from the fireplace's interior.


Once you've completed this, it's time to begin cleaning the light bulbs and blower. Remember not to use water on the light bulbs or the blower, as this could create an electrical risk. Instead, it's a good idea to employ a dry microfibre fabric to remove dust from these areas. Be sure to shut off the fireplace prior to starting to avoid any harm. Be aware that many electric fireplaces lack ventilation. This is why you should be careful when cleaning them. If you need help it is best to consult the owner's guide.

Easy to maintain

In-wall electric fire places need very little maintenance as long as they are used and installed correctly. However, it is recommended that an electrician check the unit annually to ensure that it is functioning efficiently and safely. Day-to-day maintenance can be as simple as wiping the glass surface to keep it clean and free of dust.

Before cleaning the electric fireplace, make sure to unplug it and switch off the power. This will help prevent electric shocks as well as other hazards. After the fireplace has been turned off, you are able to remove the glass front access panel and clean it using a dry microfibre cloth to remove fingerprints and other dirt. If the glass is stained with stubborn stains or spots then you can dampen the cloth slightly by mixing water and cleaner. If your fireplace is equipped with a blower, make sure to use a dry microfibre fabric instead of one that is damp to prevent water from getting into any electrical components.

In general, avoid using any abrasive cleaners or paper towels, since they could scratch or damage glass. In the majority of cases, you can clean the glass surface with a lint free cloth. However, if you notice that the glass is getting dirty or dull it is possible to employ glass cleaner or distillate vinegar to eliminate the buildup. You can also spray the cleaner directly onto the cloth to prevent streaks from appearing on the glass.

Once the glass has been cleaned, you can replace it with an entirely new one and plug in your fireplace. If electric fireplace with wall mount has a mirrored surface, you may have to gently rub the mirror using a soft towel to get rid of any streaks. You can also purchase a pre-made glass cleaner spray which comes in a variety of strengths.

It is also important to clean the air vents and inlets at the base of your fireplace. They can become extremely dirty and interfere with your fireplace's flame effect. For best results, you can make use of a soft, dry microfibre cloth to wipe these areas. If you're looking to wash an area that is difficult to reach and clean, you can use compressed air to blow out any dust.