11 Ways To Completely Revamp Your New Nissan Key Nissan Intelligent Key Programming

The Nissan Intelligent Key is a new technology that gives you more control over your car with just the click of an icon. Learn how to program the Nissan Intelligent Key with our service department in Elizabeth City.

Place the key into the ignition without turning on your vehicle, remove it quickly. Repeat this procedure six to ten times until the hazards light flashes twice, indicating the key is in programming mode.

Key Fobs for Replacement

Modern Nissan cars come with key fobs that do more than just unlock your car's doors. In certain models, Intelligent Key fobs also have a button to roll down your windows or assist you in finding your car in a congested lot. If you are in the right parking area, they'll start your car. If you're unable to unlock your Nissan with the remote, there may be an issue with the batteries. It's possible to replace them by a simple procedure that does not require any special tools.

The process begins by opening the transmitter compartment. It is located within the vehicle, typically near or in the vicinity of the door jam of the driver or under the armrest. From there, look for a button that reads "program," or something similar. Press and hold the button until the door locks blink, which is usually three seconds.

Remove the key first, and then try it again. After about six to 10 attempts you should be in a position to lock and unlock the car. If it doesn't work, your key fob might have to be replaced completely. The certified specialists for parts and technicians at Nissan of North Olmsted can help you determine if your key fob functions correctly, or if it's time to replace it. You'll have to bring the key with you to prove of ownership, however this will take no more than just a few minutes.

Programming key fobs and programming keys

Nissan is proud to provide drivers in the Middletown area with a variety of innovative technology that will streamline their drives. Intelligent Key is one of these breakthroughs, which enables drivers to lock and unlock doors, open and close the trunk and even start their engines without a key. This feature is life-saving for those who commute in the morning. However, it's essential to understand how you can program a new keyfob, or replace its battery. Our customer service team will be delighted to help.

To program a Nissan Intelligent Key you must first close all the doors on your vehicle except for the driver's side door. Make sure the key is in the ignition and is turned to ACC. After about six seconds the hazard lights flash twice. This indicates that the key was successfully programmed.

You can test the key by standing few feet away from your Nissan after it has been synced. Make sure you press the buttons on your Intelligent Key fob, and when the lights flash or the horn sounds once, it means that the key has linked to your vehicle. You can also test it by walking close to your Nissan by opening the door, and then taking out the key. If it worked you're now able to go back to driving around Kearny.

Key Fob Battery Replacement

If your Nissan key fob battery is dead, you will no longer be able to unlock or close the doors to your car or trunk, or start the engine. You can pay a minimal labor cost for your Nissan service center to reprogram the remote or save money by changing the batteries yourself.

The process might seem complicated at first glance but once you've got the steps down, you'll discover it is simple. You will need to get a new battery before you begin. They are available at hardware stores, online retailers and big-box retailers. You will also require a flat-head screwdriver to take out the old battery. It is recommended to conduct this project on a non-conductive area, like a wooden workbench to avoid damage from static to the circuit board within your Nissan.

Once you have the new battery, follow these steps for putting it in place. The battery has a positive and a negative side. It must be installed correctly to perform. Once you have inserted the new battery, put it into the ignition without running the vehicle, and then remove it. Repeat emergency locksmith to 10 times until you can see the hazard lights flash twice.

Key Replacement

Many of the latest Nissan vehicles come with smart keys that allow owners to lock and unlock their doors or trunks, as well as start the car with a click of a button on their intelligent key or remote. These keys feature sophisticated encryption and radio frequency technologies for additional theft protection. They also have an internal battery, which is required to be replaced as it wears out due to regular use.

Bring your Nissan to a professional locksmith nearby if you are looking to replace a smart key. This will reduce the expense of having pay for a tow to your local Nissan dealership as well as the cost for reprogramming your key to your Nissan.


Nissan Smart keys are available in a variety of styles and, although they look similar, they have distinct features that have to be programmed for your specific car model. When looking for a brand new key online you should be sure not to buy a key that has an unsuitable transponder chip or it will not be accepted by your Nissan.

Another frequent issue is lockouts that are accidental, caused by the mistake of misplacing or locking your keys inside the vehicle. Nissan will sound a chime when this happens when you press an icon on your key or remote. This is a great security feature that will stop you from damaging your vehicle or yourself.