What Is Double Glazing Window Lock Repair' History? History Of Double Glazing Window Lock Repair Double Glazing Window Lock Repair

Double-glazed windows are energy efficient and offer comfort throughout the year. But problems can occur.

If a window is difficult to open, this can let in valuable heat and cold from your home. This also weakens the security barriers in your home. Fortunately, this can often be easily fixed. Find out more about upvc window lock repair.

Stiffness

If you find your uPVC window handles are stiff or have trouble locking, it may be down to lack of lubrication. If you keep your windows and doors opened for long periods, dust and grit can accumulate and wear out the mechanism in the handle. The handle then begins to resist turning and forces you to apply more pressure to unlock and open your window. This cycle continues until either the handle or locking mechanisms eventually break down.

It is advisable to contact the original retailer in case this occurs. They will often offer a guarantee of up to 10 years and cover the cost of replacing hardware. However, you can try fixing the issue yourself by lubricating the hinges and locks by spraying them with silicone. This is a simple task that should take just about a minute and can be completed once per year to ensure your windows remain in good condition.

This is especially crucial if you live close to a road, since the dust and grit can cause damage to your hinges over time. To accomplish this, open your window wide. Then use a screwdriver to loosen the screws on the left hand side of the frame. Once the screws have been loosen, you can move the handle away from the frame. If you find that the sash is getting a little rough on the frame, loosening the friction screw will allow it to move. Repeat this process for the right hand side of the frame, adjusting the handle a bit upwards if needed.

There should be an average gap of 1 The sash should be 4 inches from the frame. This should help the window close and seal properly, preventing unwanted drafts from entering your home and reducing energy bills. A draughty door or window could also weaken your home's security and increase the risk of being burglarized. Double-glazed windows that don't close properly permit heat to escape. This can cause dampness and condensation.

Cracking/Blowing

Double-glazed windows are an excellent option to reduce energy costs as well as increase your home security. Like any other equipment that you own, they could need to be repaired or replaced. It is important to find an expert to complete the work. Checkatrade can help in this regard by putting you in touch with local tradespeople who have been verified and screened to ensure that their work is exceptional. It's also best to use an expert who is certified since they are protected by insurance in the event of any damage that occurs during the job.

You can use our search tool to locate an FENSA certified double glazing installer in your region. We will then connect you with reliable companies. You can also visit the website of a particular FENSA-approved company and get in touch directly to discuss your needs. You can also find out about the services that they provide and any special offers available to you.

Over time, the window seal may crack or deteriorate that can result in moisture and air leaking between the two panes of glass. This could cause misting or a cloudy appearance in the middle of the window unit. This is caused by the failure of the sealant, and is often resolved by replacing the glass unit.

A damaged double pane can be a major nuisance to your home, and you'll want to have it repaired as soon as you can. Luckily, it's an easy task for a professional joiner or double-glazing technician. In some instances repairs may be attainable by you.

Double Glazed Windows that don't shut properly could cause draughts, allow valuable heat to escape and weaken the security of your home. They could also cause damp or water damage when left unattended. Contact a double-glazing specialist as soon as you can in the event that your uPVC windows are having issues. This will help to ensure that the issue does not get worse, and will save you money in the long term.

Condensation

If you notice condensation appearing on the exterior of your windows, it could be a bit alarming, but do not worry, it's not a sign that your double glazing isn't operating correctly. Instead, this is an ordinary occurrence and actually a positive thing because it means that your home is well ventilated and is able to retain heat. This is more common in the early morning or later at night when temperatures are low and there is less wind.

But, if condensation forms between the glass panes this is a more serious issue and may indicate that your window seal has failed. This is because the seal is no longer able to hold the gas that is used to insulate the window panes, which means the moisture is trapped and leads to condensation. You will need to contact the company that installed your double glazing. They are likely still covered under warranty. It is not advised to repair or alter the units yourself, because this could void your warranty.

This problem can only be solved by taking the sealed unit off and replacing it with a new unit. This is a task best handled by a professional as you'll need to ensure that the new sealed units fits properly and that there are no gaps.

It can be difficult to spot gaps in your windows made of uPVC. In most cases, you'll only notice it when try to shut the window or door. If you are able to fit a piece paper easily into the gap, this could be due to a misalignment of a hinge or a broken one. This may indicate that your window needs replacement.

Glass Unit Replacement

Over time, double-glazed windows become stiff. The handles may also stop working. They can also develop a layer of condensation between the glass panes, which can cause drafty air within your home. While it may be tempting to replace the entire window, this can be expensive and time-consuming.

The good news is that a few easy steps can assist you in repairing your double-glazed windows and restore their function and appearance. You'll need some tools to complete this.

A pry bar will be needed to remove the frame from the sill. After that, you'll need to cut the sealant holding the IGU in place with a utility knife or hacksaw. Depending on the age of your windows they could be held in place by an insulated metal block (Photos 3 and 4) which is caulked and difficult to cut. In double glazing repair is advisable to contact a professional.

After you have removed the old window, insert the replacement window by taking off the gasket and then moving to the next section. Use silicone sealant to create a water- and airtight seal between the new window and frame.

Last but not least, you will need to install the handle and attach any caps made of plastic that you put on your screws. If you're not confident handling broken glass, it's recommended that you seek out a professional for this phase of the process. This will help you stay safe and reduce the risk of injury while working with broken glasses.


Double-glazed sealed units can last up to 35 years. However, they can develop problems in the course of time. These problems include a decrease in energy efficiency, the buildup of condensation between the glasses as well as chips or cracks on the glass. The window seal may have been blown. This can be spotted by the appearance of streaks, fogging or condensation between the glass panes. Broken windows can be fixed by replacing the sealant which is a cheaper option than buying and installing a new double-glazed window.