Watch Out: How Car Ignition Lock Is Taking Over And What Can We Do About It Why Your Car's Ignition Lock Isn't Working

The ignition lock is a security feature that stops you from getting your car started unless you have your original key. It activates when you use the wheel for support when you get in or out of your vehicle or even touch it when parked.

It can also be caused through theft or vandalism. You can repair your key if you are having difficulty turning it.

The ignition switch is the ignition

The ignition switch is a small part of your car that is vital to driving it. It's among the first things you turn on your car and is also the one that activates all other systems in the car too. If it's not working it could be a huge issue.

Wear and tear is the primary cause of a car ignition switch breaking down. This can happen with time, especially if your keychain is weighed down by additional items. You can avoid this by having a separate set of keys for your home and car, and also by reducing the weight on your keychain. The other cause is mechanical problems. If the ignition cylinder gets misaligned, it can make it difficult to remove or insert your key. If this is the situation you'll need to replace it.

In addition to these mechanical issues the ignition switch could also be failing because of an electrical issue. There may be a burning or smokey smell when you try to start your car. If this happens, it's important to have it repaired in the earliest time possible to prevent further damage.

The ignition switch may be stuck in the ON position. This is a security feature that prevents anyone from removing your car key and re-starting it. This usually indicates that you're applying too much pressure on the ignition switch, or the key isn't working properly.

In this case, you can lubricate the lock to see if it helps. This will help to remove any dirt particles that may hinder the key from turning, and you can try it again. You can also use an lubricant made of silicone, which will prevent dirt from building up inside the lock. If you're still having issues try wiggle the key before inserting it once more.

The lock the cylinder

The ignition lock cylinder in a car is the mechanical part where the key gets into the cylinder to start the vehicle. The cylinder has pins that move up and down to allow the key to enter and out. Also, it has wafer tumblers to keep the pins in their place. Over time the tumblers become worn out or even break, preventing the key from turning. Eventually, the cylinder can fail completely, leading to dead batteries and other issues in the vehicle's starting.

The most popular type is the cylindrical lock. They are made up of an outer shell and an opening that is cylindrical, inside which the plug is housed. The shell that covers the outer is typically made of steel, while the plug is often made of brass or bronze. Cylinder locks are available with a variety of pins, which allow them to lock or unlock in a variety of ways. Certain cylinder locks include additional security measures such as snap-line pins or additional pins to prevent bumping of the lock.

It is possible to refine a tough lock using graphite, however these solutions don't usually work for very long. It is best to replace the ignition lock cylinder. This can be accomplished by taking the old one out of your car, and replacing it with a brand new one. Keys will need to be replaced to replace the cylinder.

Standard systems usually cost less than $300 to replace the ignition lock cylinder. Some vehicles have electronic locks that are more costly to replace. It is important that the process of replacing the ignition cylinder is done by a certified professional. This is because the procedure involves removing parts that could interfere with the restraint systems that are supplemental (airbags).

It is necessary to disconnect the negative battery cables before you can replace the battery. This is necessary to prevent an airbag from being accidentally deployed. Also, you should disable the airbag system if it is equipped with one. You must follow all instructions provided by the manufacturer. You'll need reset the anti-theft codes following installation of the new ignition lock. This will stop your car from being stolen. It could require a specific tool.

The most important

If your key is turning but isn't able to start your car, it could be a sign that your ignition lock isn't working. This is a small but important part that ensures that only the correct key is used to operate your vehicle. It's a mechanical component that works with an electrical component to "read" anti-theft coding to allow your vehicle to begin. As time passes the key could damage or wear out the wafer tumblers in the lock cylinder, making it difficult to turn.

You can fix the ignition problem in your car with a few simple troubleshooting techniques. Make sure that your key is in the correct position and that the indicator is pointing to the P (Park slot) on the shifter. If it's not, that could cause the engine to stop being started and a quick visit with your dealer may be necessary to find out the root of the problem.

You can also play with the ignition key, but don't apply too much pressure or force. This will allow for the release of any tiny damage to the wafer tumblers that's stopping it from turning. If this doesn't help, you can try lubricating the wafer with a silicone lubricant.

You can find these types of fluids at your local auto parts store, but you should ensure that you are using the best one that will stop dirt from accumulating and causing more problems in the future. If all else fails you will need to remove the ignition and replace it with a new one. This is an easy process that DIYers can easily follow with the aid of online guides or manuals for auto repair.

If you've been detained recently for DUI or DWI your state may require that you install an ignition interlock (IID). These devices are intended to stop drunk driving by forcing drivers to breathe into a tube prior to beginning their vehicle. The device should be installed only by a provider approved, such as Intoxalock and LifeSafer.

The wiring

In many vehicles the ignition switch as well as lock cylinder are connected with wires. When you insert your key into the ignition the current flows through these wires and activates all the electrical systems in your vehicle. If the electrical system is not functioning or the switch is stuck in the on position, it may be due to a wire that is disconnected. If you are unable to identify the issue, it could be necessary to replace the ignition switch or cylinder.

Interlocks for ignition devices

An ignition interlock device (IID) is a vehicle breathalyzer that has to be fitted in your vehicle as part of a criminal sanctions or a legal requirement. G28 Car Keys can detect alcohol-related disorders in drivers by analyzing their breath prior to when the engine of the vehicle can be started. If the IID detects that the driver's BAC is higher than the limit allowed the horn will sound and/or flash lights, so that the driver can pull over and test again.


Ignition Interlocks are a fantastic tool for those suffering from an alcohol dependence disorder, since they require the user to blow into a mouthpiece prior beginning the vehicle. They are small and discreet, so they are easily hidden away from view to avoid drawing attention. Interlocks for ignition are leasing, not bought, and the cost ranges from $60-90 a month.

The ignition switch and the ignition cylinder control all electrical components in your vehicle. The ignition will not work when one of these components is damaged or worn. If you're experiencing one of these issues, it's essential to fix them as soon as possible.

If you're unable to get your car to start, try placing the key in Park or neutral, and then turning it. If it doesn't work, you might need to remove the battery and remove the airbag to access the ignition switch. This is a easy task that can be completed with a steering-wheel puller or GM key removal tool that you can borrow from AutoZone’s free loan-a-tool service.