10 Broken Car Key Repair-Friendly Habits To Be Healthy Tips For a Broken Car Key Repair

A key breaking in the ignition can be extremely annoying. To avoid further damage avoid turning the key.

Get help from a professional as soon as possible. A locksmith will be able to remove the damaged part without causing further damage. In the meantime, try to find an alternative method of getting around by taking the bus or getting a ride from a friend.

Assessing the Damage

A damaged car key can be an actual hassle. It could be difficult to get where you'd like to go, you may lose money and time or you may have to make costly repairs to your vehicle. It is essential to remember some tips for repairing a broken car keys to help you solve the issue quickly.

First of all, do not try to remove the broken key yourself. This could cause more damage and damage your lock ignition cylinder. Modern locksmiths have the necessary tools to extract a damaged car key without causing further damage.

Your car key may break due to many reasons, including damage, wear or improper handling. The key may become worn out and cannot fit into the ignition. This could be due to regular use or after being exposed to harsh weather conditions.

A blockage in the keyway or cylinder of ignition can also cause your car key to break. This could be due dirt or debris that accumulated over the years and caused damage to the grooves of your key. If you have an electronic key with modern functions, the issue can be caused by issues with the battery, or how your car connects the keys.

If your car keys break in the ignition or door lock it is best to call a professional locksmith immediately. It's best to avoid damaging the car by trying to force the key out.

Super glue isn't the best method to repair your car keys. It's likely to break after a couple of uses and won't be as efficient as a proper tool from a professional locksmith. Instead, use a thick wire or a nail to fix the damaged plastic loop. If you can you can drill a hole at each end of the nail or wire to the key's width and then apply glue in both holes. Dry it before using the key again.

Removal of the damaged part

You can remove a broken car key from the door lock. However, remote key fob repair should be very careful to avoid damaging the lock further. A set of needle-nose pliers as well as penetrating oils can help you do this. A jigsaw with teeth facing downwards can be used to secure on the broken piece within the lock and then take it out at an angle. Avoid twisting the piece since this could cause it to break completely or cause damage to the ignition cylinder.

If your car key breaks out of the lock you'll likely need to call a locksmith or visit the dealership for a replacement. If there is enough of the broken piece sticking out, you may be able to pick it up using the help of pliers. Be careful not to turn the key using screwdrivers or pliers since you could cause the key to break or cause damage to the lock or ignition.

Super glue can be used to fix the broken loop on your key. Make sure to apply a gel-type glue, not just a thin one, and allow it to dry before putting the key into the lock. This is not a good idea because a mistake could result in misalignments that can cause damage to the lock and the ignition system.

As an alternative, you could use a large piece of wire or finishing nail to replace the loop that your car keys have. For each end of the wire or nail, drill two holes in the broken loop on the key. Apply a small amount of super glue to each hole after cutting the wire or nail to the same length as the key. Slide the nail or wire through the holes to seal the broken loop on your key.

Keeping the two pieces of your broken car key makes it easier for locksmiths to create a exact replica. This reduces the chance of issues with your new key, which will save you money and time in the long time.

Finding a New Key

Sometimes, keys for cars can break in a way that it's difficult to start a car. It happens when you use too much force when turning the key, and it is broken in the ignition. It can also happen when you use your key fob to open the door, and then it gets stuck or gets caught in a snag. If this happens, you'll need to contact a locksmith or a dealership for assistance.

It's a major trouble to have a damaged key in your ignition because you're unable to drive your vehicle until the problem is fixed. This is because the key is used to switch the car off and on and also to unlock doors and enable other features. There are some steps you can take to repair a damaged key in your ignition before it gets more serious.


First, you should try to remove the broken part of your key by using pliers. If you're lucky, your car key was broken near the top and should be easy to remove of the lock. If it was broken at the bottom, you'll face more trouble removing it on your own, and you may need to use a pair of special tools. These tools are narrow, flat and have hooks with small holes at the end. They grasp onto the key's fragment and pull it out. You could also consider using a lubricant such as powder or liquid, to loosen up the key and make it easier to remove.

You can also contact a mobile locksmith who will arrive and replace your damaged keys. This is typically cheaper than going to the dealership, and it could save you lots of time. They can also design a key that matches the key you have in your car which is crucial for vehicles that have programmed chips.

Lastly, you can try to reconnect the two parts of your key with super glue. This is a risky option however, it is possible to be successful. Be careful not to cause the key to become stuck again in the ignition or lock.

The New Key: Programming

It is possible that you will not be able to change your key by yourself, based on the type. Only the dealer or a locksmith can do this, because it protects your car's security system from unauthorized access. This is an essential step to ensure that no one uses another key to start your car and possibly stealing it. It can make the process more difficult particularly if the fob needs to be replaced.

If you're in a hurry it's possible to apply too much force when pressing the key to unlock or open your car. This can cause the key to snag or break in half inside the lock. The key could also become stuck in the ignition, which can prevent you from getting your car started. This can be frustrating and cause a disruption to your schedule. There are ways to fix this problem before it gets out of hand.

You can take the broken piece of a key from a lock using basic tools you may already have at home. Tweezers are good for picking small pieces, and pliers are useful to remove the key. You can also use a key extractor, which is a tool specifically designed for this purpose that is typically found at auto parts stores. You can inject lubricant into the lock to help in the extraction process.

Keep both pieces of the broken keys. This allows the locksmith to create a more precise duplicate that can make the replacement process faster. This can also help you to get back on the road sooner. If you don't have any spare keys working and you're in need of a replacement, ask the dealer to start your car using the new key, and then use it to program your new one.

You can also buy an additional key from a locksmith and then insert it into the ignition to put the computer system in programming mode. After some time then switch the key to the "on" position, but do not actually start the engine. After that, switch to your new key and go on your way. This process can take a few minutes to a few hours, so you'll need to be able to get to and from the location until the process is complete. This might mean taking public transportation or relying on friends to take you for an ride.