10 Things We Love About Repairs To Upvc Windows Repairs to uPVC Windows

uPVC is a fantastic option for modern homes. They are easy to maintain and are durable and long-lasting. They do not get rotten or rusty like aluminum and timber.

Regularly cleaning and lubricating UPVC windows and doors is crucial. This will reduce repair costs and improve energy efficiency.

1. Broken Glass

If the glass in your window has been damaged, it can cause a great amount of damage to your home, making it extremely dangerous and possibly fatal. It is essential to ensure that your windows are in good working order.

Single-pane windows are relatively easy to replace and typically fit into old frames very easily. If you have double-paned windows that are held together by internal beading, it is difficult to remove and replace the panes that were previously in use. In this instance it is essential to purchase plastic spacers to make sure that the new pane fits into the window frame.

If you are going to attempt to remove the glass panes yourself it is important to wear the appropriate safety equipment such as gloves that are thick and eye protection. It is also recommended to lay down a drop cloth before you begin working on the window panes so that any shards of glass fall onto the fabric and not onto the floor which could cause them to be trampled.

It's a great idea seal the gap after the glass is removed. This will prevent drafts and water from getting into your property until a professional comes out to fix the window. It also acts as a barrier that will prevent any intruders from getting access into your home. If the gap is particularly large, you might be interested in an alarm door that comes with an integrated window, as it offers the best of both worlds.

2. Sagging

uPVC is durable energy-efficient, cost-effective and economical alternative to timber sash windows. In time, they could develop a number of problems such as sliding. A sagging window can cause problems with light, draughts, and even security. It is crucial to act immediately if you realize that your uPVC windows are falling down.

Repositioning the hinges can aid in fixing a window which is sliding. First, you'll need to open the windows to get at the frame. Then, remove both the hinges at the top and bottom using a screwdriver and adjust them counter-clockwise or clockwise. Once you've repositioned the hinges, close the window and check for an appropriate fit. If you are happy with the size of the window, tighten the screws to keep them in place.

If you cannot reposition the hinges, you might need to replace the seal. Over time, rubber seals lose their elasticity and become dry, which causes them to loosen. If this happens, it's crucial to replace the seal as quickly as possible to ensure your uPVC windows are watertight and draught-proof.

uPVC handles may also loosen. Often, this is caused by screws that have become loose over time. However, it can be due to the fact that the handle mechanism has worn out. Fortunately, it's easy to fix the loose uPVC window handle yourself. First, you'll need to close your window and do an experiment fit. The corner joints of the sash should be aligned with the casing joint. If it isn't you can use a screwdriver to loosen the handle. Then turn the mechanism into position.

3. Water Leaks

If you awake to wet floors and mouldy walls every time it rains it's crucial to take action. The leaks of water through windows could cause structural damage to your home and hinder your ability to control the temperature of your home. The most frequent reason for leaks in uPVC windows is that the sealant surrounding the frame has been damaged or missing.


This is an easy fix that can be accomplished by any DIYer who has the ability. Depending on the severity of the problem the old caulking might need to be removed before a new layer is applied. It is important to remember that when it is about uPVC window repairs, you should not be tempted to 'over-caulk and then make the area harder to clean and reduce the efficiency of your energy.

It is essential to ensure that the drainage holes are clear of debris and that the sill pan has been angled in a way that allows it to drain away from the window. In more serious cases you may need to think about replacing the window.

Other signs of long-term water leakage include decayed sills and the appearance of black spots of mold on the wall near the window. The fungus thrives in humid conditions and can propagate quickly throughout the house.

If the leakage occurs between the double-glazed window, it is more likely that the problem is with the seal than the frame. This can be easily repaired by an uPVC window specialist who will replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are difficult to open, or slack and blow open with a breeze, it may be hinges at fault. window repairs near me who is a skilled DIYer can fix these in a matter of minutes.

Like any mechanical component, hinges can be damaged over time. It's easy to change a window hinge however it is easier if someone helps hold the frame.

Check that the uPVC hinges are open and closed in the right direction. You can do this by looking for the arrows on each hinge. This shows which way the window should open.

Window hinges that aren't working properly could be the result of incorrectly opening the window a certain way or by inadequate installation at the factory. It is usually possible to fix the issue by sending us a photograph via our website and we will be more than happy to give you advice.

It is also essential to ensure that the hinges are lubricated on a regular basis. Applying an engineering lubricant that is light to the hinges is a great way to do this. We suggest using an oil that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regularly lubrication will help the window open and close more easily. It can also lower the chance of windows sticking and help prevent corrosion. The ideal time to perform this every year. WD40 and other solvent-based lubricants are not recommended as they will damage parts of your uPVC window.

5. Draughts

Draughts can be caused by different things. The hinges, also because of wear and tear, may become displaced, which will cause a gap to form where the sash joins the frame. This can be easily repaired by giving them good clean, but in the event that they are beyond repair it may be necessary to get them aligned or replaced. Secondly the interlock, this is located on the hinge side of the window and can also be misaligned, and again it's possible to just give them a clean but in some instances it could be necessary to have these replaced.

The seals may wear out or get damaged over time, allowing air to escape. This can be prevented by replacing them with high-quality weatherstripping. Replace the windows made of upvc with low-emissivity glasses. This will help control indoor temperatures, and reduce the possibility of draughts.

One of the most effective ways to cut down on draughts is by using a draught excluder, these are typically fabric tubes which are filled with a sort of filler and can be placed on the windowsill on top. They can keep your home warm by blocking cold air.

Your windows made of upvc will keep providing excellent insulation and security for your home with a little regular maintenance and repairs. It is crucial to keep in mind that all windows will eventually become worn out, and it may be cheaper to replace them than to repair them. So, if you are experiencing problems with your upvc windows, it is always best to seek professional assistance as soon as possible.