11 "Faux Pas" That Are Actually Acceptable To Make With Your Upvc Window Replacement Hinges Choosing Upvc Window Replacement Hinges

It's not as difficult as it could seem to choose and fit the replacement hinges made of upvc. Make sure the arrows on the hinges face in the correct direction, and measure the thickness of the hinge arms on the frame that opens (13mm or17mm).

There are several different types of hinges, each with their distinctive characteristics. This article will focus on the most common types of uPVC window hinges and their advantages.

Egress/Easy Clean Hinge

They are an excellent choice to replace or upgrade windows for fire escapes, as they open at a full 90-degree angle. They can be closed in an easy-cleaning position which allows you to get access to the windows' exterior without the need to climb ladders or lean at risky angles.


Yale is among the most trusted and well-known brands in the world of home security. They work with all kinds of uPVC side-hung windows. They can be moved to the easy-to-clean position by pressing an unassuming button, and then moving the window sash to one side. When the sash is closed, it will automatically return to its original position.

They are available in 13mm and 17mm stack heights. Utilize our Egress Selection Guide to help you determine the best product for your window.

These hinges are designed to be used with standard side-hung frames that is made of aluminium or uPVC. The friction screw is used to adjust the resistance. This makes opening the windows more simple and reduces the chance of accidental closing during high winds. They have been cycle tested to more than 30000 cycles and comply with BBA/Secured by Design and British Standards approved BS EN 13126-6:2008.

The Nico Egress Easy Clean friction hinge is simple to use and does not have buttons or catch. It is a simple and safe solution to emergency exit and cleaning. Firstly, open the window to the egress (full opening) position and then press the hinge retaining clip that is located on the inner side of the bottom corner. This will release both the catches on the top and bottom and allow you to slide the sash to the easy-cleaning position. Once it is in the easy-clean position, close the window to return the hinges to their original position.

Fire-Escape Hinge

Fire Escape Hinges are often referred to as "Easy Clean" hinges are used to replace windows that open sideways to allow egress (fire safety) reasons. They allow for an opening larger in the event of fire. This type of hinge is legal in any room that has windows, as stipulated by building regulations.

The windows feature a friction stay that allows them to open at a 90-degree angle. They also allow the opening sash slide across the glass when opened, allowing for easy cleaning without having to use ladders. The hinges are simple to operate and don't have complicated buttons or catch mechanisms. They can be operated from the inside of the house using a simple, safe lever.

The hinges, made in the UK by Cotswold and Cotswold, have the safety of children in everyday use. It can be reverted with a hidden button. You will have peace of mind knowing that your children will not accidentally open the windows too wide. They are available in 13mm and 17mm stack heights.

Measure the length of the side-hung window hinge, which is fixed to the frame. (See the article on measuring the length of upvc window hinges). Choose the right size hinge below.

It is important to note that this measurement is taken from the hinge's point that connects to the frame and not the sash. The actual hinge length can be longer or shorter depending on the way your windows were made in the past. Also, when selecting the size of your hinge, the majority of upvc windows can be fitted with 13mm stack height, however should your old window frame has 17mm, then select the option to use this. You can also opt for the 4mm packer in order to make up for the difference. All the hinges are supplied in pairs (1 left and one right). The hinges are not equipped with screws. These can be bought separately if you require. Our upvc window repair screws are recommended. These screws are designed to increase your hinges' performance and allow them to operate efficiently for a longer. They feature a less friction design and an improved weather seal that is fitted with a new nylon reducer cap.

Restricted Hinge

There are occasions when a window needs to fully open and this can be a challenge using hinges that are standard. These child safety friction hinges are a great way to solve this problem. They can be used when ventilation is needed but cleaning or escape from the flame is not feasible. They work by restricting the amount of sash that can open, and allow for the override of this restriction with a button. They are available in 13mm and 17mm stack heights and can be used to open both side and top hung windows.

The Nico Restricted Egress Friction Hinge combines the characteristics of a standard restrictor as well as a fire escape hinge to provide an efficient and easy way to meet building regulations. It is suitable for side-hung and top opening uPVC windows and comes in 17mm and 13mm stack heights. It comes in a pair with one hinge being the restricted egress, and the other being the unrestricted. This permits one hinge to be installed at the bottom while the other hinge is placed on top.

These uPVC hinges are restrictive and have been tested to BS6375 Part 2 and are designed to be used on windows that cannot be opened fully such as a small children's bedroom. The mechanism restricts the amount the sash is able to open to a safety position of 100mm and re-engages when the window is closed.

Like upvc window hinge replacement of uPVC friction hinges they can be installed on all types of windows and are suitable for hard to reach windows above the ground level three-storey flats and those that typically require a ladder for access to them. They can be paired with our range of security enhancements such as hinge guards and protection plates, or dog bolts for PAS 24 performance.

It is crucial to take measurements of the hinges on your window to be able to find replacements of the same size. The most efficient method to do this is to look at the hinge in the gallery and determining the best place for it to be positioned. Top-hung hinges are limited on both sides, while side-hung hinges are only restricted to one side.

Standard Hinge

A standard hinge has metal-to-metal contact and no extra parts to reduce friction. It is available in a variety of finishes and fire rated. To quickly determine the radius of hinges, lay it out flat and place a quarter and dime in two corners. If the dime fits better and the corner is round by 1/4 inch. If the quarter fits better, it's rounded to 5/8 inch.

Selecting the right hinge can make or break the appearance of your door. It's essential to match the finish and style of your door to its hinges for a cohesive design that is both functional and visually appealing.