14 Common Misconceptions About Double Glazed Window Repair Double Glazed Window Repair

Double glazing is an excellent energy efficient investment that prevents heat loss in the winter and keeps your home cooler during the summer. Restoring your double-glazed windows as needed is a great way to keep them in good condition.

Over time condensation and misting could affect your double-glazed windows. Double glazed windows may become difficult to open and close.

Broken Panes

A unruly ball, a flying stone from your lawnmowers or an intense storm could shatter your double-pane windows which can expose your home to the elements. While a cracked window can be difficult to repair but you don't need to replace it entirely. The insulated glass that is between two panes of glass is still in good shape, so you can repair your double-paned windows yourself.

To begin, you'll need to remove the broken glass from the frame. You'll need to be careful to avoid any glass shards falling to the floor or slipping from the frame. Use a pair of work gloves to shield your hands from injury and a cloth to cover the area surrounding the broken glass to avoid further damage or breaks. After removing the broken glass and cleaning the entire frame of the window to remove any remaining sealant and debris. It's important to sand rough areas of the frame to create a smooth surface for your new glazing.

After cleaning the frame, you can apply a new layer of glass to the seam in which the broken pane was removed. This is the best method to keep your window secure and sealed and will save you money by stopping drafts and water from entering the house. The next step is to select your glazing material. There are a variety of options, including clear tape that is more durable than regular tape and prevents further cracking of your window or glazing film, which is similar to clear plastic wrap. The benefit of this type of material is that it can be painted over to match the frame you have, and it will keep out rain and snow as well.

No matter what material you use it's essential to press the glazier's points into the place where the putty joins your frame. These will hold the glass in place, and aid in adhering to the frame. Glazier's points can be found in hardware stores, and they are available in pre-made ropes that you simply roll out onto the frame rabbets.

Condensation

Double glazing is susceptible to condensation issues and if you encounter this issue, it is best to call the company that supplied the window. There are warranties and guarantees to address the issues. Condensation and fogging in the panes of glass is a clear sign that the seals between your windows have been damaged and must be repaired by an expert who will repair both panes.

window repair near me is a bit tricky and requires the use of specific tools to remove the old pane and install the new one, but it is possible to do this by a professional who will provide the required equipment. It is best to delegate the job to professionals. These tools can be dangerous.

If you do decide to do it yourself, ensure you wear safety glasses and gloves to shield yourself from any broken glass pieces that may fly off during the process. It is also important to remove all the putty and metal glazing points from the grooves where the new window will be. Wire-brushing the frame or vacuuming it with a damp cloth is also recommended. Once the frame has dried, you'll need to order a replacement piece of glass that's 1/8" shorter in both directions than your existing window. Make sure the glass fits into the grooves.

Based on the frames you have depending on your frames, you'll need to apply a layer of silicone caulk on the grooves to ensure that the new pane is securely in place. After the caulk is dry and is dry, you must smooth it and make any adjustments needed. The wood molding can be reinstalled.

If the weather suddenly changes, double-glazed windows could be difficult to open and close. Extreme temperatures can cause frames to shrink or expand and this can make them fall or stick. Try wiping the frames with water and then lubricating them in the event that this happens however, it's better to seek advice from the company that installed your windows.

Misunderstood

If moisture is trapped between the glass panes, it can cause misted double glazing. Double glazing is comprised of two glass panes which are separated by an insulating space, typically filled with argon gas to provide increased thermal efficiency. This creates an airtight sealing that keeps warm air inside, and cold outside air out.

In time, however, this seal can break down and moisture will begin to accumulate between the window panes, causing them to turn misty. This occurs because the sun heats the gap between the window panes, which causes the water to evaporate.

It is a natural phenomenon, but if it occurs between the panes of the window it could cause problems since it will no longer be able control the temperature within the room. Instead the temperature outside the window will influence the temperature indoors. If you notice that your double-glazed windows have become cloudy, contact the experts at Northfield Glass to investigate.

We can replace a single blown sealed unit without needing to replace the entire window. This is much less disruptive than a full replacement. Our misty window repair involves removing the glass unit, cleaning it, and replacing it with a new one to create a watertight seal again.

There are companies within the industry that claim to drill holes in your windows with mist and inject chemicals into them which claim to eliminate fog & condensation, however, we do not recommend this procedure. This is not only unsightly but could also damage the toughened glass, leaving you with a window which isn't functioning properly.


It is essential to address the issue as soon as you can, as if untreated, it can result in the growth of mould which can not only damage the window, but also poses health risks for your family members. The moisture in the window may cause other issues with your property, such as damp or rot. In some instances the window might need to be completely replaced.

Failed or Blown

Double-glazed windows are made up of two glass panes with an air or inert between them. This improves their thermal efficiency by keeping heat in and the cold out. Over time, this gas can become depressurised, leading to a number of problems.

Condensation between the panes is one of the most common. It's not a sign of a failure in the window, but it could be a sign you should reseal them. Condensation can also be a sign of a broken double glazing, which could need to be replaced.

You should also look out for draughts coming from the double-glazed windows. This could be caused by a failure of the seal or a broken handle or lock. It is essential to fix this problem as soon as you can. A draft will force you to spend more on heating. Test the seals on the window frame by feeling the cold air.

Another indication that your window seals have failed is when you begin to notice water beading on the inside of your windows. This is a good indicator that you need to seal your double-glazed windows.

Your window frames are designed to move a bit in order to keep the glass sheets in position. As time passes, this particular packaging material can become compressed. This can result in the seal being broken. This allows air to flow between the panes, and decrease the efficiency of your window.

Double glazing that has ruptured a seal is an indication of failure and should be repaired as soon as is possible. A blown seal will prevent your double glazing from performing its primary job of keeping cold out and warm in. Furthermore, a blow-off seal will let your home's moisture in, which can cause mold and other unpleasant conditions. Contact a double-glazing specialist immediately you spot a damaged window seal. They can fix the entire unit.