The Double Glazing Repair Success Story You'll Never Remember Why You Should Trust Your Double Glazing Repairs to Local Experts

Replacing double glazing is not a DIY job however a glass specialist can make it easy and safe. It is also advisable to contact the company that sold it to see whether there is an warranty.

Drilling holes into windows that are misted will let the condensation out however it is only a short-term solution. Double glass that has blown away must be replaced to restore the thermal efficiency.

Broken window panes

When a window's pane is broken, it creates a gap in the double-glazing which can lead to draughts or moisture. They are not only uncomfortable but they can also cause damage to your home and health. In fact humid environments can lead to rotted frames and other structural issues that can be expensive to repair.

But, a damaged pane is usually a simple fix when you know how to fix it properly. First, you must take the necessary precautions to avoid injury like wearing gloves and eye protection. Take away the glass fragments. Make use of a utility blade to cut through any metal glazing points and glazing putty after you have removed all the glass shards. When the glass is completely free, carefully remove it from the frame.

After you have cleaned the area and sanded the area to remove any gunk or paint, it is time to prepare the new glass. Make sure to take measurements of the opening from side to side and top to bottom and subtract 1/8 inch from both measurements to accommodate any expansion or contraction of the frame as time passes. This will ensure that the new glass is properly fitted.

Next, roll a cord of glaziers' compound around the outside of the glass-frame joint. Then smooth it with your putty knife, matching the color to the rest of the window frame. Once the compound is dry, you can paint the compound and the new pane to match the rest of the window.

In order to stop the crack from traveling make a small arc with your utility knife, just beyond the crack. This will curtail the crack and stop it from spreading, thereby saving your window from the need to replace it.

It can be difficult to repair your own home without the proper tools. It is safer and more convenient to get in touch with a company that specializes in repairs to local double-glazing. This will help you save time and money, and make sure that your double-glazing is repaired to the highest quality.

Broken seals

A damaged seal could cause windows to lose their insulating properties, leading to drafts and higher energy costs. It also allows humidity and moisture to enter the window panes, leading to condensation and fogging. Foggy windows are a nuisance and will only get worse over time if you don't take action.

There are many ways you can prevent window seal breaks by having your windows professionally installed and avoiding washing your windows with power. Even if your windows appear great, you should get the seals replaced as soon as possible if you notice any signs that the seal is damaged like condensation on the glass or an increase in your energy costs.

Window seals are made from flexible materials that may become damaged as time passes. This is more prevalent in older windows, and also those that have been exposed excessively to sunlight. Window seals could be damaged due to issues with installation, like gaps and sloping frames.

Although it is possible to fix the seal that is broken on your windows but the process is complex and damage other components such as argon within the window. It is recommended to contact a professional glazier to assess your windows and fix any damaged or worn out seals.


When the window seal has been replaced, your double glazing will be able to perform as it should, protecting your home from unwanted heat loss and cold air infiltration. This will save you money on your heating and cooling expenses while ensuring your home is cozy.

In most cases, to repair a damaged seal on a window it is required to remove the window from the sash. The old sealant should also be removed. After the window is clean and ready to be put back in, it will be refilled with argon gas and sealed once more. It is possible to complete the work yourself, but it is recommended to contact an expert to ensure that the job is done in a safe and correct manner.

Broken door handles

The handle on the front door of your home is an important part of your security. It opens the door and attaches to a latch set into the slot of the door frame in order to keep it shut. If the handle isn't secure it could cause you to have trouble opening the door. It could be an indication that the locking mechanism is not working properly.

Fortunately, fixing a broken door handle is fairly simple. In the majority of cases, you'll need to tighten the screw that holds it in place. If the issue is more severe, you may have to replace the handle.

To begin, you'll need to make sure that you open your door using a wedge or stop so that it doesn't shut while you work on the knob or handle. This will stop it from causing damage to the paint, and also allow you access to the entire knob or handle without worrying about the latch slipping.

The next step is to remove the coverplate, which is placed over the door handle. It may appear like a circular or rectangular piece of plastic that's designed to conceal screws for a more attractive appearance. Some might have a tiny slot or detent that you could use a flathead screwdriver to press down on to open it. After that, you'll need to remove the base of the handle off and expose the screws that secure it.

The cover plate conceals most of the screws that hold your door handle or knob in place. Once you've removed it, you can see each one and tighten them as necessary. Be sure not to over-tighten them, as this could cause damage to the knob or handle. Once the screws are tightened, you can replace the base, and then put the handle or knob on the top. Make double glazing repairs Slough that the holes of the knob or handle align with the detent holes or the holes in the screws. Once you're finished, test out the handle to make sure it's functioning properly.

Chips and scratches

Sometimes, even the most well-maintained double glazing can be damaged. It only takes a few hits from scattered footballs or a sudden gust of wind to cause cracks, chips and dents. These damages could have a negative impact on the performance of your windows and doors and require them to be replaced. It is crucial to recognize the signs of damage and contact your installer as soon as you can, at least in writing. You can help by describing the issue, as well as photos as appropriate.

It is possible to repair chips or scratches without a lot of effort, based on the severity. If the scratch is severe enough that you can feel it with your fingernail, it is recommended to contact a glazier to get rid of it. They will be able to make use of glass polish to remove the scratch. They will also be able offer some tips for maintaining your windows and doors to keep them in good condition.

Also, you should look out for signs that the gas space between your window panes is causing and leaking. If you see condensation between the window panes, this could mean that the inert gasses have been vaporized and warm air is now circulating through your home. It is important to contact your installer immediately if you spot this issue, since it could be covered by your warranty.

If your double-glazed windows are covered by an assurance, you can claim any repair costs. You may also want to consider switching to a different installer who can be relied upon to deliver high-quality products and excellent customer service. You can check online reviews, look at the BBB and ask for references from past customers to ensure that you choose a company that has a good reputation for professionalism and quality. You should also inquire about certifications from major manufacturers as well as the Fenestration and Glazing Industry Alliance. This will allow you to stay clear of companies that are not authorised to install your double glazing.