This Is The New Big Thing In Repairs To Upvc Windows Repairs to uPVC Windows

uPVC is a great choice for modern homes. They are durable, long-lasting and easy to maintain. Unlike timber and aluminium, they do not corrosion or rot.

Regularly cleaning and lubricating UPVC windows and doors is vital. This will reduce repair costs and improve energy efficiency.

1. Broken Glass

The damaged glass in your windows could cause serious damage to your home, and could even be fatal. It is crucial to take the time to ensure that you are doing everything you can to ensure that your windows are in good condition.

Single-pane windows are relatively simple to replace, and they typically fit into frames that were previously in use very easily. If you have double-paned windows that are joined by internal beading, it will be more difficult to remove and replace the old panes. In this instance, it is necessary to buy plastic spacers to help the new pane fit into the window frame.

If you are going attempt to remove the window panes by yourself it is crucial to wear the appropriate safety equipment that includes gloves with a thick layer of material and protective eyewear. It is also recommended to lay down a drop cloth before you begin working on the window panes so that any shards fall onto the fabric, not onto the floor, where they could be trampled.

After the glass has been removed and the glass is removed, it's a good idea to seal the gap with packaging tape or duct tape to block water and drafts from getting into the home until a professional is able to come out and repair the window. It also acts as a barrier that will prevent any intruders to gain access to your home. If the gap between the door and the window is significant, you may want to use an alarm system that includes an opening. This will give you the best of both.

2. Sagging

uPVC is durable and energy efficient alternative to timber sash window. As time passes, they may develop a number of problems that include sliding. A window that is sagging can cause problems with light, draughts, and even security. It is crucial to act immediately if you realize that your uPVC windows are sliding.


To fix a sagging window you can try repositioning the hinges. First, you'll need to open the windows to reach the frame. After that, using a screwdriver, you can unscrew the top and bottom hinges and adjust them by turning them clockwise or anti-clockwise. After you've repositioned the hinges, close your window and verify the fit. If you're satisfied with the fit of your window, you can tighten screws to hold them in place.

If you are unable to reposition the hinges, you might have to replace the seal. Over time, rubber seals lose their elasticity and dry out, which causes them to loosen. It is crucial to replace your seal as soon as you can in order to ensure that your uPVC window waterproof and draughtproof.

uPVC handles may also become loose. Often, this is caused by screws that have come loose over time. However, it could also happen because the handle mechanism has worn out. It's relatively simple to fix a loose uPVC handle. The first step is to close your window and do a test fit. double glazing repairs Slough at the corner of the sash should align with the joint on the casing. If it isn't then you can use a screwdriver to loosen the handle, and then reverse the mechanism back into position.

3. Water Leaks

It is important to take action if you awake each day to find mouldy walls and wet floors. Water leaks from windows not only lead to the degradation of your home's structure but also undermine your efforts to regulate the temperature within your home. Most of the time, uPVC window leaks are caused by a lack or damage to the sealant.

This is a simple fix that can be done by anyone who is a DIYer with the skills. Based on the severity of the issue the caulking that was used up may require removal before a new layer can be put on. It is crucial to keep in mind that when it comes to uPVC window repairs you should avoid the temptation to "over-caulk in order to make the area more difficult to clean and could decrease the efficiency of your energy usage.

It is important to check that any drainage holes are clear of debris and that the sill pan has been angled correctly so that it drains away from the window. In more serious instances, you might need to consider replacing the window.

Moldy sills and rotten ones are another sign of water leakage. The fungus thrives in humid conditions and can propagate quickly throughout the home.

If the leakage is occurring between the double-glazed glass, it is more likely the problem is with the seal rather than the frame. This can be easily corrected by an uPVC window specialist who will replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are brittle to open, or loose and open with a breeze It could be the hinges that are at the fault. Anyone who is a skilled DIYer can fix hinges in just a few minutes.

Like any mechanical component hinges will wear out over time. It's easy to change the hinges on a window but it's much easier if someone else helps you hold the frame.

It is also important to ensure that the uPVC hinges are opened and closed in the right direction. You can check this by looking for the arrow on each hinge. This indicates which way the window should be opened.

Window hinges that aren't working properly could be caused by improperly opening the window a certain way or by poor installation at the factory. This issue can be fixed by sending us a photograph through our website and we will be happy to give you suggestions.

Regularly lubricating the hinges is also necessary. Applying an engineering lubricant that is light to the hinges is a great way to do this. We recommend using the lubricant that doesn't contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication will make the window easier to open and close. It also decreases the risk of a window sticking and help prevent corrosion. This should be done at least once a year. WD40 and other solvent-based oils are not recommended because they will damage parts of your uPVC window.

5. Draughts

Draughts in Upvc windows can be caused by different factors. The hinges, also due to wear and tear can become misaligned, this will cause gaps to develop between the sash and the frame. If they are damaged beyond repair, it might be required to realign them. Secondly the interlock, this is on the hinge side of the window and can be misaligned. Again, it may be possible to just give them a clean but in certain cases, it may be necessary to have these replaced.

The next most common reason for draughts are the window seals. They are susceptible to being worn out or damaged over time, and let air escape through the gaps. This can be prevented by replacing them with high-quality weatherstripping. Another option is to replace the upvc window with glass that is low-emissivity, which will help regulate indoor temperatures and again will lessen the risk of draughts.

Another, and most effective ways to cut down on drafts is to use a draught excluder, these are usually fabric tubes which are filled with a type of filler. They can be positioned on the top of your windowsill. They can keep your home warm by blocking cold air.

With a little regular maintenance and repair, your upvc windows will continue to provide a great level of security and insulation for your home. It is crucial to realize that all windows have a life span and there may come an point at which it is more economical to replace them than fix them. If you are experiencing issues with your window made of upvc, it's best to consult an expert as soon as possible.