10 Things We All Love About Repairs To Upvc Windows Repairs to uPVC Windows

uPVC windows are a great option for modern homes. They are long-lasting, durable and easy to maintain. They don't get rotten or rusty like aluminum or timber.

It is important to clean and oil UPVC doors and windows regularly. This will reduce costly repairs and increase energy efficiency.

1. Broken Glass

The damaged glass in your windows could cause serious damage to your home, and could even be fatal. It is important to make sure that your windows are in good shape.

Single-pane windows are relatively simple to replace, and they will usually fit into the frames of the past easily. If you have double-paned windows which are joined by internal beading, it will be difficult to remove and replace the panes that were previously in use. In this case it is essential to buy plastic spacers to aid in fitting the new pane into the window frame.

Wearing eye protection and thick gloves is essential for anyone who plans to remove the glass by yourself. It is also recommended to lay down a dropcloth prior to you begin working on the window panes so that any shards fall on the fabric, not onto the floor and could be trampled under.

After the glass has been removed and the glass is removed, it's a good idea to seal the gap with clear packaging tape or duct tape to block drafts and water from entering the property until a professional comes out and repair the window. This also serves as an obstruction to prevent intruders from making their way into your home. If the gap is large, you may think about an alarm door that comes with an integrated window, since it offers the best of both worlds.

2. Sagging

uPVC is durable and energy efficient alternative to timber sash windows. In time, they could develop a number of problems such as sagging. A window that is sagging can cause problems with light, draughts or even security. If you find that your uPVC window is beginning to lose its shape, it's important to act quickly to prevent the problem from getting worse.

To repair a window that is sagging, you can try to reposition the hinges. To accomplish window repairs near me , you'll need to open the window so that you can access the frame. With the screwdriver, you'll be able to unscrew the hinges at the top and bottom and adjust them by turning them clockwise or anti-clockwise. Once you've repositioned the hinges, shut your window and verify the fitting. If you're satisfied with the size of the window, you can tighten screws to secure them in place.

If you can't reposition the hinges, you may need to replace the seal. Over time rubber seals can lose their elasticity and become dry which causes them to lose tightness. If this happens, it's important to replace the seal as fast as possible so that your uPVC windows are waterproof and secure from draughts.

uPVC handles can also loosen up. Most often it is due to screws that have become loose over time. However, it could occur because the handle mechanism has been worn out. It's relatively simple to repair a loose uPVC handle. First, you'll need to shut the window and then perform an initial fitting. The corners of the sash need to align with the casing joint. If it doesn't you can use a screwdriver to loosen up the handle. Then, you can turn the mechanism to position.

3. Water Leaks

It is important to take action if you awake each day to find a smoky wall and wet floors. The leaks of water from windows do can not only cause degrading of the structure of your home but also hamper your efforts to regulate the temperature in your home. The most common reason for leaking uPVC windows is that the sealant surrounding the frame has been damaged or missing.

This is a simple fix that can be done by any DIYer who has the ability. Depending on how severe the problem is, the old caulking may need to be removed. When it comes to uPVC repair, you must be careful not to over-caulk. This can make your window more difficult to clean and decrease its energy efficiency.

Check that any drainage holes have no debris inside them and ensure that the sill pan is properly angled to allow the water to drain from the window. In more serious situations, you might have to consider replacing the window.

Other signs of long-term water leakage are rotted sills and the appearance of black spots of mold on the wall near the window. This fungus thrives in humid conditions and can propagate quickly throughout the home.


If the leakage is occurring between the double-glazed glass it is more likely the problem is related to the seal, not the frame. A uPVC specialist can easily fix this issue by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

If your uPVC windows are brittle to open, or loose and blow open with a breeze, it may be hinges at the fault. They can be easily repaired by any skilled DIYer and are usually completed in just a few minutes.

Most households in the UK will have top-hung or side-hung uPVC windows that have hinges and like any mechanical part they will wear out over time. Changing a window hinge is an easy procedure, but it is easier if you have someone to assist in holding the frame in place.

Check that the uPVC hinges are open and closed in the correct direction. Check for the arrows on each hinge to determine which way the window should be opened.

The issue can be caused by opening the window improperly or a faulty installation at the factory. It is usually possible to fix the issue by sending us a photo via our website and we will be happy to give you advice.

It is also essential to ensure that the hinges are lubricated regularly. Applying a light engineering lubricant to the hinges is a great way to do this. We suggest using the lubricant that doesn't contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication can allow the window to operate and close more smoothly. It can also reduce the risk of a window sticking and prevent corrosion. Ideally, you should do this once a year. WD40 and other solvent based lubricants are not recommended as they could damage parts of your uPVC window.

5. Draughts

Draughts can be caused by different factors. The hinges can also be unbalanced due to wear, causing a gap where the sash meets frame. If they are beyond repair, it might be necessary to get them re-aligned. Secondly the interlock, this is located on the hinge side of the window and can be misaligned. Again, it may be possible to just give them a clean but in some cases it might be necessary to get them replaced.

These seals can wear down or be damaged over time, allowing air escape. This can be prevented by replacing them with high-quality weatherstripping. Replace the windows made of upvc with low-emissivity glasses. This will help control indoor temperatures and lessen the risk of draughts.

Another method of reducing drafts effectively is to use a Draught-exclusion device. These are usually made of fabric tubes filled with a filler that can be placed over your window sill. They will keep your home warm by blocking cold air.

With a little regular maintenance and repair windows made of upvc will provide a great level of security and insulation for your home. It is important to remember that all windows will eventually get worn out and it may be more cost-effective to simply replace them rather than repair them. If you have any problems with your upvc window it is recommended to speak with a professional as soon as you can.