One Repair Car Keys Success Story You'll Never Believe How to Repair Car Keys

You must know what you should do when your car key is damaged. It is best to determine if your bumper-tobumper warranty, insurance or auto club will cover it.

With traditional keys that do not have chips it's as easy as creating an exact duplicate. An associate will choose the correct blank for the key and trace its contours with the key cutting machine on site.

Keys that are worn

You use your car keys often and they are damaged from wear and wear and tear. This can result in them not working correctly or getting stuck inside your ignition. If your key is damaged, you should replace it before the issue gets any worse.

If you must shake or jiggle the key to turn it, it's worn out and should be replaced. It is also crucial to check the key cylinders in your ignition and doors regularly for debris and dirt. If you observe that they are getting worn out it is essential to remove the keys from the ignition and clean them using a a dry cloth. You can also purchase a lubricant made of graphite to use on metals to decrease friction.

If you attempt to turn your key but it doesn't turn the cutting edges might be worn or dull. The grooves could cause them to be distorted and the key will not fit in the lock or ignition. It is important that you contact a locksmith right away if this problem occurs to prevent further damage.


A key that is worn out will often begin to scratch the internal surfaces. This can cause the key to stop working or even break within the lock cylinder. If this happens, you will have to visit an locksmith to buy a replacement key.

Another common cause of a worn out key is if it has been accidentally dropped or thrown around. Take anything you don't require from your keychain in order to slow the rate of wear. It is important to take care of your keychain, as the weight of your keychain wears out the internal mechanisms quicker.

Honda keys are particularly susceptible to wear and tear due to their unique wafer mechanism than other manufacturers' cars. The edge of the Honda key is an extremely small triangular-shaped nib that extends out into the lock. This tiny nib is susceptible to wear and tear over time and the wear is concentrated on just the tip. The key will grind down the tiny nib every time it is removed from the lock.

Dead Key Fob Battery

It can be a real discomfort when you press the button on your key fob and nothing occurs. The remote-locking system in your car is dependent on the battery contained in the keyfob to transmit signals to receivers in the vehicle. When the battery is dead, you can be left without a home. The good news is that replacing it is simple and quick. Here's how:

It's time to replace the battery if your device isn't responding quickly, i.e. you have repeatedly click it before it responds. You can purchase an alternative at any auto parts store, big-box retailer, or even a few hardware stores. A CR2032 3V battery is suitable on most key fobs, but be sure to check your owner's manual or the manufacturer's site for details about which kind to purchase.

repair car key is also recommended to find a coin or screwdriver that fits into the slot and be used to pry open the key fob, so you can access the circuit board and buttons. Also, you should find a screwdriver or coin that will fit in the slot and can be used to open the key fob and access the circuit board and buttons. Once you remove the old battery replace it with a brand new one with the same + and - positions as the original one (the plus side is usually facing towards the buttons). Snap the fob shell back together, making sure everything is secure. Test all key fob buttons to verify they're functioning properly.

If you are still unable to get your car to start after changing the battery, the issue could be more serious. You may have accidentally wiped out the onboard computer in your vehicle by pressing certain buttons incorrectly. If this is the case, you'll have to check the manual of your vehicle for instructions on how to reprogram the key fob and start your car.

Keep a spare battery for your key fob in case of emergency to ensure you're not left in the dark if the primary one fails. If you can't replace the key fob battery, your car probably has an additional key that is mechanical inside that you can use to manually unlock and lock your doors.

Broken Keys

It's very frustrating to be in a position in which your car key is broken off inside the ignition lock. Trying to forcefully remove a broken car key from the ignition could make the situation worse, as it will likely result in more severe damage. The best method to deal with this issue is to contact an expert locksmith in your area and have them remove the damaged key from the lock and make you a new one.

If your car key is able to open the door, but cannot start the car, it could be a sign the ignition cylinder in your car is in a state of depreciation. It's the same issue that causes keys to stop working after a long time of use or putting it through many sweats. If this happens you can reset your keys following the instructions in the owner's manual.

You can also visit your dealer and have a brand new key made. This can be costly and not all models work. If you choose to do this, take your VIN number to the shop to make sure that the key cuts are compatible.

Another alternative is to find an appropriate nail dimension between the two ends of your key. The key must be made of steel to accomplish this, which means you'll have a difficult time using keys made of plastic. Super glue can be used to connect the two parts of the key, but it is not recommended as this could damage your ignition.

You can also buy a key extractor, a special tool. These tools are equipped with hooks that are designed to slide into the keyway, and then grip the broken bit of metal. They are available at hardware stores, or in the auto section of the big box stores. Be aware that using any of these methods can actually push the broken key further into the lock. It is better to contact an expert locksmith instead.

Locked out

Locked out of your car can be more than an inconvenience. It could be dangerous when there children in the car. There are many ways to deal with this issue, and methods to avoid it in the first instance. Plan ahead. This could include signing to an emergency roadside assistance program, subscribing an automaker's app, or hiding an extra key in your home, office or with trusted family and friends. You can also purchase an automobile that has excellent security features, like the current inventory at Longo Toyota, and make sure that it has an additional key.

Batteries can be the cause of your car keys not working. If your key fob requires multiple presses to unlock or start the car, it's time to replace the batteries. You can either opt for the keyfob repair kit or hire a locksmith to do it.

The keys to your car could stop working if they are damaged. This is usually due to rough use or ageing. Over time the grooves on keys might wear out and no longer match the depth of the lock or ignition.

The keyhole can become blocked by dirt or other impurities. This will make the key difficult to fit. A malfunctioning lock may cause this issue. It is prone to wear out over time, or snap if you apply intense pressure when turning the key. It is recommended to contact an expert locksmith instead of trying and tinker with the lock yourself, since this could cause further damage to the lock.

It's not unusual for people to pick the wrong set of car keys especially when they're in a hurry. It's important to keep in mind that each key fob is programmed with a specific code that is only valid for one vehicle. If you can't find your original car keys, it's possible that they're at home or in the office however it's also likely that someone stole the keys. If this is the case, you will be required to contact your local auto dealer or authorised service centre for assistance.