20 Great Tweets From All Time About Door Lock Car Repair How to Troubleshoot Door Lock Problems Before Calling a Mechanic

You can use keys or locks with a key opener to help. You can also squirt penetrating oil or linseed oils into the lock to lubricate it and get it moving freely again.


However, it is not a project for the casual homeowner, and it is best left to a licensed and certified locksmith. Here are four key lock issues that they can solve:

Power door locks don't work

Power door locks are convenient, but they also introduce more complicated mechanisms into the car. That means that there are plenty of possibilities for things to go wrong, too. If the door lock actuator doesn't work it could be a serious problem that requires professional assistance. Before you call a mechanic, try some simple troubleshooting techniques.

The first thing you need to check is the battery inside your key fob. If it's not working or is nearly dead, that will obviously result in the locks not to work. This problem is easily and cheaply resolved by replacing the battery.

Another possible issue is that the power actuator itself may be faulty. This is a frequent issue that is generally straightforward to identify. You can test with a multimeter if the power is reaching or not. If it is and the actuator isn't responding to the door lock button and it's time to replace it.

You can also clean the contacts on the door lock actuator. This is more complicated than just cleaning a switch however it's usually enough to solve the problem. To do this you will have to remove the actuator and disassemble it. There are usually bolts that hold the exterior section of the body, so unscrew them and then take out the entire body of the actuator.

After you've removed your actuator, it's important to be cautious not to break the rod that connects it to the lock mechanism. Two bolts are usually located within the interior of the doors that contain the rod. Be sure to remove them as well. Once the rod is removed, you can examine the latch to ensure that it is correctly aligned with the locking post.

If not, you can insert a long, thin object between the lock and door panel. This should release the locking mechanism so you can unlock the door manually.

The key fob isn't working

If your car's key fob isn't working, it can be an unpleasant experience. However, there are some ways to get it to work again. First, you must replace the battery. This simple change can save you from having to buy a new fob. There are a lot of useful YouTube videos that demonstrate how to do this in a few easy steps.

If this doesn't work, you may need to re-program your fob. In most cases, this can be done by a professional. It's not easy because many modern cars include security features that have to be set up correctly.

Your fob could also be damaged. The cause of damage can be many reasons, including physical force, water, or scratches on the circuit board. Oftentimes, this damage isn't evident and can only be detected by opening the fob to inspect inside. You can look for these issues by looking at the fob for any signs of damage, like cracks on the circuit board, tiny electronic components that aren't fully connected to the circuit board, or buttons that are not in good condition. G28 Car Keys may also open the fob in order to remove the battery and have a closer look. By using a flathead screwdriver you can typically pry open most fobs and gain access to the battery however some require specialized tools or equipment only available at your car's dealership.

If the fob isn't working, you can try opening your car doors with the physical key. If the physical key isn't able to unlock your car, it might be time to contact an locksmith or go to the service center for more serious repair.

If your key fob doesn't turn on or start your car It could be due to a malfunctioning ignition cylinder. This is usually a very expensive fix, and it's best left to an expert. If the key fob works with the door locks, it should be possible to start the car using the inductive backup system.

The lock is jammed.

If your lock will not turn at all despite trying to insert the key, it's likely to be a problem with the mechanism. It could be as simple as the tumblers becoming clogged by dirt or rust, or the pins are stuck in a partially raised position. The first thing to do is to lubricate the lock mechanism. Spray a dry lubricant such as RP7 or graphite spray into the keyway, and then insert the key a few times to release any debris that has gotten stuck in the lock cylinder. This will also help to lubricate and protect the mechanism.

You can also use brake cleaning fluid to lubricate lock cylinder parts, and take off any grime or rust that could be obstructing the tumblers. You can buy brake cleaning fluid in most home improvement centers or auto supply stores. You should avoid using oil-based products like WD-40 since they can block up the brake mechanism over time.

The frame of the door may have moved due to temperature and changes in the weather. The deadbolt or latch on the door might no longer align correctly with the hole on the frame. This problem can be easily fixed by tightening hinges and replacing damaged or stripped screws.

It's always an excellent idea to examine the condition of your door locks on a regular basis. This will stop them from becoming damaged or jammed and save you the time and money of calling a locksmith for assistance. Don't hesitate to call your trusted local mechanic if you find yourself with damaged or locked door lock. They can identify the issue quickly and suggest the best option. If you're looking for an easy solution to your power doors or have a more serious issue, they'll be happy to help!

The lock is stuck

Stuck locks are a frustrating and often inevitable part of owning a vehicle. You'll want to resolve the issue as quickly as possible, before it gets worse. There are some simple and quick solutions to help you get out of this sticky situation.

Start by inspecting the lock and determining what is hindering it from functioning correctly. Sometimes a foreign object can get stuck in the lock or a screw may have become loose. You can resolve either of these issues by cleaning the lock or tightening the screws. You could also attempt to straighten or fix the ball inside your lock, if they're deformed or are warped by prolonged use.

Another reason for a stuck lock is that it's simply worn out and isn't responding to the jiggling. If your lock doesn't turn when you play with it, it's likely time to replace the lock and ensure that it is keyed correctly.

If your lock is stuck and no amount of wriggling or spraying lubricant seems to solve the problem, you'll probably need to contact a professional locksmith for help. They have the skills and tools to safely get rid of the lock that is stuck, without causing damage to your vehicle or door.

Sometimes, the cylinder in the lock may be damaged. This could be the case in the event that the lock was forced open in the past instance, or if a lock problem was not repaired. It's a good idea to examine your cylinder on a regular basis for signs of corrosion or wear and replace it when needed. This will help ensure that your car is as safe as it can be. And if the lock cylinder is damaged or cracked, it can be a huge safety risk for your passengers as well as you. So be sure to have any damaged cylinders repaired in the earliest time possible.