Pay Attention: Watch Out For How Nissan Qashqai Key Fob Is Taking Over And How To Stop It Reasons Why Your Nissan Qashqai Key Fob Won't Work

The Qashqai's bigger dimensions give it an SUV feel. Its 19-inch alloy wheels on Ti and STL models may also be a bit firm. The front tyres on the Qashqai are also prone to losing grip on rough surfaces and its CVT can occasionally show wrist-flexing torque steering.

This is generally caused by an inoperable coin battery, which can be easily repaired in a matter of minutes. Make sure that the new battery is the same size, voltage, and specification.

Water Damage

One of the most common reasons that a Nissan key fob will give the "key ID is not correct" message is due to water damage. The key fob comes with rubber seals which protect the chip inside, but prolonged exposure to moisture could cause it not to function properly. It is common to observe this if your key fob was dropped in the water or in a swimming pool. But it can also occur when it's wet due to showers or soapy hands.

If your key fob is exposed to water for a long period of time, it might need to be cleaned using isopropyl alcohol or an electronic cleaner. In addition, it may need to be taken to a professional for repair or replacement.

If your key fob require replacement, the procedure is relatively simple. Make sure you have the correct multipack (CR2032 3V). Then, you can open the front and back cases using the small flathead screwdriver. Remove the clips made of metal, then remove the old battery and replace it. After reassembling your fob, put the mechanical key back in its place and make sure it functions as intended. If it does not, you'll need to take it to a Nissan dealer or professional auto locksmith for the replacement of the chip in the key. Fortunately the chip isn't typically damaged by exposure to water which means that this shouldn't cost you a lot.

Dead Coin Battery

The coin battery is another common reason for why your Nissan Qashqai remote key fob might not work. The batteries typically last between 3-5 years, but they can become depleted over time, especially when the fob is dropped frequently. It is possible to replace the battery with a new one, but make sure that it's the same voltage and size as the original. If you choose to use another battery, it may cause the key to have an incorrect key ID, that could hinder it from pairing with your vehicle.

The best method to replace the coin battery in a Nissan Qashqai Key Fob is to open it with the help of a small screwdriver with a flat head. The screwdriver should be inserted into a small notch on the bottom of the fob, and turn it around gently to separate the two parts of the key fob. Remove the old CR2025 battery and replace it with a brand new one, noting the position of the old one in the fob.

Check the terminals for dirt or water damage prior to installing the new battery. If not, clean the terminals using some isopropyl ethanol. Make sure that the pole cables are connected correctly. They should be connected to the negative and the positive poles of your battery.

Fault Diagnosis

If your Nissan Qashqai key fob stops working after exposure to clean rain or tap water, it may be an indication of an internal chip issue. A battery change won't solve this issue, and you'll have to purchase the new key fob. If you dropped the key fob on the ground and it stopped functioning immediately, this is most likely due to damage to the internal chip. If you clean the chip with isopropyl ethanol and paper towel and then replace it with the key fob, it is possible to generally get it working.

A common error that you may see on your dashboard is "Key ID Not Correct." The car is unable to recognize the key fob which is why it won't allow the car to start. The problem can be caused by a variety of factors including water damage, undetectable problems in the key fob's circuitry or RFID interference.

The key fob will not function if the 12 volt batteries are dead or fail to provide enough electrical current. This will affect the Nissan Qashqai's remote keyless system, central locking and the ability to start the engine with the key fob. Check the battery in the key fob if you are unable to lock or unlock your door manually. nissan replacement car keys can also try installing the battery again to reset your transmitter.

Reprogramming

If the key fob was not submerged in saltwater the device should be able to be restored to its original state with a simple rinse of clean water. You can also clean the electronic component using isopropyl or electronic cleaner. If none of these work then you might need to replace the key fob.


If your Nissan Intelligent Key is still not functioning, there may be an issue with the connection between it and the car. To reconnect it, start by turning the key in the ignition but without starting the car. Continue to do this until you see the warning lights flash twice. Turn the vehicle off and take away the keys.

Then, then open the fob compartment in your vehicle. It's usually found on a door jamb, or the handle for the driver's door. Find the small "program" button and press it. You will hear a sound when the process is completed.

It's time to test your Intelligent Key to the test. You must stand a certain distance away from the vehicle, and press all the buttons on the key. If the lights flash and the horn sound, it means that the key has successfully linked to the Nissan. You can also try testing it close to the Nissan.