Why Subaru Car Keys Is Your Next Big Obsession How to Programming a Subaru Key Fob at Home

Depending on how new your Subaru is, you might need to have your key fob programmed by an automotive or dealer locksmith. This is usually done by connecting a programming machine to the computer in the vehicle.

To program your Subaru, start by unlocking the driver's doors using the door button control, and then shut it. You will hear a sound on the instrument panel and the dome lights will blink.

Step 1: Locate the Transmitter Circuit Board

There are a variety of ways to program your key fob. It is first necessary to identify the kind of key fob you own. You can do this by taking a look at the key fob's shape or by listening to the car for a chime.

Once you've got the information and have it, you can begin the process of programming your keyfob home. You'll need an aluminum flathead and a key for this. The key fob case can be opened by twisting it. Then, push the metal key into the case and remove the battery from the tiny tabs that hold it in place. Replace the battery and then put the case back together.

Step 2: Remove the key fob case

It is a good idea to change the battery in key fobs if they aren't working. However, there are some situations in which the buttons inside the key fob could be broken. If you notice that the button's metal contacts have become loose Try reconnecting them in order to make them function again.

Before you begin the process, make sure your car's doors are shut and that your ignition is turned off. Close the driver's side doors and press your button 10 times in rapid succession. Then you'll hear the instrument panel chime and your dome light will flash. This means that you are ready to move forward.

Step 3: Insert the fob for the key into the ignition

There are many articles online that give instructions on how to program a replacement or new Subaru key fob at home, but they are not precise. A professional locksmith or auto dealer in Fort Bliss is the best solution for reprogramming your electronic car key.

Sit in the driver's seat of your Subaru with the engine off and all doors shut. Use the door button to unlock all of the doors. Open and close the driver's door twice more. Then, remove the key from the ignition switch (don't turn it) 10 times in 40 seconds. The system should chirp to confirm that the settings have been altered.

Step 4: Turn the ignition On

It is essential to realize that this method of programming a key fob works if you already have a functioning key. If not then a dealership or auto locksmith will be required to program a brand new key for your Subaru in Fort Bliss.


Once the key has been programmed, it should be able to start your vehicle within a matter of five seconds. Begin by closing all doors and turning off the engine. Sit in the driver's chair and unlock the doors using the door button. Insert the key in the ignition and turn it back to the first position. g28carkeys.co.uk will be activated however, the engine will remain in neutral. Repeat this process ten times.

Step 5: Unlock the Driver's Door

Subaru offers many high-end automobiles with key fobs that lock and unlock doors, start the engine, and even defrost windows. These gadgets can sometimes stop working.

Contact a locksmith or dealer to solve the issue. This will solve the issue and make sure that your car is safe.

To do this, open the driver's doors and close it. Then, insert the ignition key in and switch it to the initial position. Then, turn it back to the off position. Repeat this ten times in an order as fast as you can. After ten times you should hear a chime.

Step 6 6. Press the Lock/Unlock Buttom on the Driver's Door

If you're looking to replace the battery in a Subaru key fob, the procedure is straightforward. First, open the exterior fob casing. Then, use an flathead screwdriver, to pry open the interior case and remove the old battery.

After removing the battery, replace it with the new one. Close the case. Then, sit in the driver's chair and unlock all doors using the door button control. Then, put the key in the ignition and turn it so that the electrical systems are powered on but the engine is off. Repeat this 10 times until you hear a chime sound on the instrument panel. This puts the system into programming mode.

Step 7 Step 7: Press the Lock/Unlock button on the Passenger's Door

The annoying chirp which can be heard when unlocking or locking the Subaru Key Fob from the outside of the vehicle can be distracting for some owners. In some cases the chirp can be disabled by closing and opening all doors and a double click of the lock button on the key fob.

Close all doors, including the lid for the fuel-filler, and switch off the ignition. Press and hold the lock side of the key fob's lock button for 10 seconds. After that the instrument panel emits an audible chime. The chime signifies that the fuel-filler lid and door lid are locked. It is possible to change the setting so that doors lock automatically without the need to press a switch.

Step 8: Enter the 8-Digit Transmitter Number.

Keep the first 8 digits of the code in your mind. Now, sit in your driver's chair, close all the doors and then turn the key back to the first position (towards on). After 10 turns, your panel should chime once.

Then, open the key fob case and find the circuit board for the transmitter inside. The circuit board should have one or two numbers with 8 digits. Follow the steps in the guide to register the code. This may require visiting the dealer for older models.