17 Signs That You Work With Volvo Keyfob How to Change a Dead Volvo C30 Key Fob

The Volvo C30 is a good car that falls victim to a few minor imperfections. It's very comfortable and nicely equipped for its two front seats. However, the rear seats are cramped and cargo space is a bit limited.

If your Volvo key won't turn, it could be due to a number of issues. Certain keys require programming, and should only be programmed by a dealer or automotive locksmith.

How do I change the blade on the key

If your Volvo key fob has an unresponsive battery however, you might still be capable of unlocking your car by using the mechanical blade inside. In the majority new Volvos, there is an internal mechanical key that can be used to open the door of the driver in an emergency if remote keys fail to work. You can also use the mechanical key to start the vehicle with the push-start button on your Volvo is activated by the sensor as you enter the car.

To access the blade, put your fob upside down with the "Volvo Cars Logo" on it. Then, find the small black button on the left of the key fob, and slide it down and to the right. The cover will come off and allow you access to the secret key blade that is inside.

The key fob battery can be changed easily. Slide the key fob away from the key ring, then lift the back of the cover to reveal the battery. The battery is an ordinary CR2032 watch-style battery. Replace the old battery with the new one. Be careful not to touch either of the + or - poles of the battery by using your fingers. You can find these batteries at most grocery stores and pharmacies.

How to Change the Battery

The key fob contains one battery that is likely to need be changed at some point during the life of the car. The fob contains a mechanical blade that lets you unlock the door of the driver when the battery in the remote dies or the keys have been lost.

The battery can be replaced quickly, but be careful not to damage the electrical contacts made of metal inside the back cover of the fob. To pry up volvo car key of the fob, you can use the small flathead screwdriver or a prybar-like plastic automotive tool. After removing the cover, you can replace the battery by putting in a new silver button-cell (CR 2430 3-volt) with the "+", positive side facing downwards, and the "" negative side facing towards yourself.

Once the new battery has been installed, the fob can be reassembled and a key blade can be inserted. The alarm will be turned off by pressing the unlock button just once. If you press it twice all doors will be unlocked, and the tailgate will be opened in the event that your vehicle has one.

The majority of pharmacies and grocery stores offer batteries that are replacements. These batteries are sold as watchbatterien and have the numbering system to help you identify them.

How to change the ignition Cylinder

Ignition cylinders are important for your Volvo to function properly. They provide energy to the various elements of the car and enable it to start. Over time they can become worn out and should be replaced. If you notice that your Volvo is not getting started or stops during driving, then you might require replacing the cylinder that controls your ignition.

If you're fortunate, it could be an easy mistake or a mistake you made. You might not have removed the key completely, or it may be stuck in the lock. You can try to free the key by moving it around and shaking it gently. Avoid applying too much pressure, since it may break the steering wheel or the ignition switch.

The ignition switch may also be faulty. This switch is used dozens of times per day, and it's no surprise that over time it will wear out. It will usually start to fail on one of the settings that power accessories or the ignition before stalling. Stalling indicates that the ignition switch is about to fail completely, therefore it's crucial to get it checked out as soon as you notice issues.

The technician will inspect the entire system in order to find what's causing the issue. They'll check the ignition key, the cylinder, and other components of the security system. If you own a newer car, they'll also look at the wiring to determine if there are any problems with it.

How to Change the Remote

There is a simple and quick way to replace the battery on your Volvo key fob if it goes out. Utilize a flat screwdriver to pry the back cover off your key fob to swap the battery. You can open the battery cover open by pressing the small grey button located in the upper right corner of your key fob. Then, you can remove the battery you have and replace it with an entirely new one. This will take 30 seconds or less.


If you have a modern Volvo model that has remote window roll down, you can control this feature using your Volvo key fob. You can also use the lock button to shut the sunroof and windows (if fitted). The unlock button on the Volvo key fob for your SUV will disengage the alarm and open the driver's door when you press it once. The other doors and the tailgate will unlock when you press it twice in succession.

If you notice an "REMOTE BATTERY LOW VOLTAGE" message in your car's instrument cluster, or the locks don't respond when you're within distance, it's time for you to change the battery for your remote key. Replacing the battery of your remote key is an easy and quick procedure that can be completed in a matter of minutes, either at home or at a local dealer.