15 Inspiring Facts About Door Repair London You've Never Seen Patio Door Repair - How to Keep Your Door in Good Shape

Patio doors are a wonderful addition to any home, as they help bridge the gap between indoors and outdoors. However, they are susceptible to wear and tear and require to be properly maintained.

Doors that are damaged aren't just a security risk, they can also result in the cost of energy by allowing cold air to enter the home.

Glass that is damaged

Patio doors are an excellent way to create seamless transitions between outdoor and indoor living spaces. They can improve the aesthetics of your home and increase energy efficiency. However, over time the sliding mechanisms may develop issues that affect their functionality and overall performance.

The glass on patio doors may crack or be shattered. It can be caused by a number of reasons. It could be due to unbalanced tracks or cold drafts entering the home. It could also be because the door was incorrectly installed. However, if you're unsure about the cause of the issue, it's best to speak with an expert.

Windows that are damaged can pose dangerous for your safety however they also allow colder air to get into the home, or allow water to enter the house, or make it more attractive to criminals. It is also crucial to repair damaged windows in the shortest time possible to avoid further damage.

If your patio door is cracked it is necessary to contact a glazier to replace the glazing. This is a faster and less expensive option than replacing the whole door.

Glass panels for sliding patio doors are generally secured into the frame with glazing beads, which can be loose over time. london window repair can also break or crack when they are exposed to extreme heat. You might be able to do the work yourself, depending on the severity, but it is recommended to speak with an expert for a flawless finish and safe installation.

Sliding Tracks

Over time, dirt, dust and even rust could accumulate in the tracks of your patio door. This can cause a sluggish moving, so it's essential to keep them clean. You can do this using a mild detergent and brush. It's also an excellent idea to use a degreaser for more severe build-ups. If your door is not sliding smoothly, the track may be bent or damaged.

This is often the result of heavy doors, or pets dragging dirt into the door. The spindles or cogs may break. This can lead to the handle becoming stuck and making it difficult to open.


Another common cause of the sliding patio door's malfunctioning is the lack of lubrication. To prevent future problems, it can be accomplished by applying a silicone-based grease to the tracks and rollers. Be sure to thoroughly clean the track prior to applying the lubricant, so that it doesn't collect more dirt.

Test the door after applying the lubricant, moving it upwards and downwards. Reapply the lubricant if it's not moving smoothly. You'll soon be able to get your sliding patio doors to move again without the need for a repair.

You might need to take out your door to straighten the tracks if they're bent. This is a huge job, so it's best to get help from someone. Start by laying some cloth on the floor, and then unscrewing the plugs that cover the screws for adjusting the roller. Often, these are located in the corner of each side of the frame. Once the screws are removed, the track should be able to pull away from the wall. If you spot a section of the track that bends outward, take an rubber mallet and a piece of wood. Put the wood on the part of the track which is bent outward, then strike it with the mallet until the track becomes straight. Repeat this process on the opposite side of the track if necessary. Once the tracks have been straightened, you can reinstall the door and affix any hardware that was removed.

Broken Rollers

If you find that your patio door is difficult to open and is catching or scraping on the track, then it's time to replace the roller on the bottom. It will get worn out in time, as do any other moving part. If you put off replacement for too long, you may find the door difficult to open. This could cause an excessive strain on other components like handles that may break or the track, which could be broken.

It is a difficult job to replace the rollers and you will need to remove the entire panel from the frame. The first thing you have to do is to retract the roller wheels and give the panel a light push to see if the panel will break free. If it does, then ask a friend to help you take the panel off and place it on an even surface. Once the panel is removed you can then begin to examine it for indications of damage.

After you've done this, you can begin working on the rollers. You'll likely need a screwdriver, a pry bar or a rigid putty knife to remove them. After removing the old ones, make notes about their style and dimensions to ensure that you can replace them with the same ones.

It's possible that there's no visible damage to the rollers, and they just require lubrication. If this is the case, spray some silicone-based lubricant onto the rollers and try sliding the panel again.

In more serious situations, the bogies that are underneath the rollers will fail or the tracks they roll on will break. In this case the whole track must be replaced. This is usually an all-hands job since the panel must be lifted off the frame of aluminium before the builders can be removed. This is the most difficult part of the repair. Be careful not to crack or shatter the glass.

Weather Treatment

Paul and his wife were tired of their old patio door opening up to let drafts in when they were in the living room, watching TV or sitting in their recliner. They also noticed icicles on the frame during this past winter. The couple consulted with our expert on products who informed them that their doors were in need of weather treatment. The door was old and had a bit of corrosion due to the ages and British weather. However it was repairable to enhance the look. They decided to install windows and patio treatments that would fit with their home's decor.