Repairs To Upvc Windows Explained In Less Than 140 Characters Repairs to uPVC Windows

uPVC windows are a fantastic option for modern homes. They are durable, long-lasting and easy to maintain. Unlike timber and aluminium, they don't get rusty or decay.

It is essential to clean and oil UPVC doors and windows on a regular basis. This will help avoid unnecessary repair costs and improve the efficiency of energy.

1. Broken Glass

The broken glass in your windows can cause severe damage to your home, and could even be fatal. It is important to take the time to ensure that you are doing everything you can to ensure that your windows are in good condition.

For single pane windows it can be relatively simple to replace them, and the replacement will usually fit inside the old frame very easily. However, if you have double pane windows that are held in place by internal beading, it will be more difficult to remove the panes that are in place and replace them with new ones. In this instance, it is necessary to purchase plastic spacers in order to help the new pane fit into the window frame.

Wearing eye protection and thick gloves is a must if you plan to remove the glass yourself. It is also an excellent idea to lay down a drop cloth before you begin working on the glass so that any shards will fall onto the cloth instead of onto the floor, where they could be trampled upon and cause further damage.

Once the glass has been removed from the window, it's best to seal the gap with packaging tape or duct tape to block drafts and water from entering the property until a professional comes out and fix the window. This will also act as a barrier that will prevent any intruders from gaining entry into your home. If the gap between the window and the door is significant, you may prefer an alarm system that includes windows. This will give you the best of both.

2. Sagging

uPVC windows and doors are an affordable energy-efficient, durable and long-lasting alternative to timber windows made of sash. However, with time, they are susceptible to a range of issues, including sagging. A sagging uPVC window can cause problems with light, draughts and even security. It's important to take action immediately if you notice your uPVC windows are falling down.

Repositioning the hinges could aid in fixing a window that is sliding. First, you'll need to open the windows to reach the frame. Then, remove both the hinges on the top and bottom using a screwdriver and adjust the hinges clockwise or counter-clockwise. After you've repositioned the hinges, shut your window and check for fit. If you're satisfied with the fit of your window, tighten the screws to hold them in place.

If you can't reposition the hinges, you might require replacing the seal. Over time rubber seals can lose their elasticity and become dry, which causes their tightness to decrease. It is important to replace your seal as quickly as you can to ensure that your uPVC window waterproof and draughtproof.

uPVC handles can also loosen up. Often it is due to screws that have come loose over time. However, it could also happen because the handle mechanism has worn out. It's a good thing that it's simple to fix the handle of a window that is loose yourself. First, you'll need to close the window and then perform an initial fitting. The corners of the sash must be aligned with the casing joint. If it does not, you can use the screwdriver to loosen up the handle. Then, turn the mechanism into position.

3. Water Leaks

If you awake to wet floors and mouldy walls each time it rains, it's crucial to take action. Water leaks from windows can not only cause destruction of your home's structure but also undermine your efforts to control the temperature inside your home. Most often, uPVC window leaks are caused by damaged or missing sealant.

This is a simple fix that can be completed by anyone who is a DIYer with the skills. Depending on the severity of the issue is, old caulking may have to be removed. It is crucial to keep in mind that when it is about uPVC window repair s, you should not be tempted to apply too much caulk and then make the area more difficult to clean and could reduce the efficiency of your energy.

Check that any drainage holes do not have debris in them, and also that the sill pan is properly angled to drain away from the window. In more serious situations, you might need to consider replacing the window.

Moldy sills and rotten ones are also signs of water leakage. The fungus thrives in damp conditions and can quickly spread across the home.

It is also important to note that if the leakage is coming from between the glass in your double glazed windows it may be more likely to be a problem with the glass seal rather than the frame or sliding. A uPVC specialist can easily fix this issue by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges


Hinges may be to blame if your uPVC window is difficult to open or if it opens in a breeze. Anyone who is a skilled DIYer can fix hinges in just a few minutes.

Most households in the UK will have either top hung or side-hung uPVC windows that are hinged and, just like any mechanical component they are susceptible to wear and tear over time. Changing a window hinge is an easy procedure, but it is easier to do when you have a person to assist in holding the frame up.

It is also important to ensure that the uPVC hinges are opening and closed in the correct direction. You can check this by looking for the arrows on each hinge, this indicates which way the window should be opened.

The issue could be caused either by opening the window improperly or due to a poor installation in the factory. It is usually possible to fix the issue by sending us a photo through our website and we will be pleased to offer you suggestions.

It is also essential to ensure that the hinges are lubricated regularly. This can be done by applying a light engineering oil on the hinges, we recommend using a solvent-free lubricant such as 3-in-one Multi-Purpose Oil. Regular lubrication can help the window to open and close more easily. It also decreases the possibility of a window getting stuck and stop corrosion. This should be done at least once a year. WD40 and other solvent-based lubricants are not recommended as they can cause damage to your uPVC windows.

5. Draughts

Draughts can be caused by a variety of different causes. Firstly the hinges, again due to wear and tear can become misaligned, this will cause gaps to develop between the sash and the frame. If they are beyond repair, it could be required to realign them. Secondly the interlock, this is on the hinge side of the window, may also be misaligned, and again it is possible to just give them a clean but in certain cases, it may be necessary to have them replaced.

The seals may wear out or get damaged over time, allowing air escape. Replacing these with high-quality weatherstripping can help stop draughts. Another option is to replace the window with low-emissivity glass, this will help in regulating indoor temperatures and again will lessen draughts.

The last way to reduce draughts effectively is by using a Draught-excluder. These are usually made of fabric tubes filled with a filler which can be placed over your window sill. These will help to keep cold air out and keep your home warm and cosy!

With a bit of regular maintenance and repair, your upvc windows will provide an excellent level of insulation and security for your home. However, it is important to recognize that all windows have a lifespan and they may reach the point when it's more cost-effective to replace them rather than fix them. If you encounter any issues with your window made of upvc it is recommended to speak with a professional as soon as you can.